Mamibot EXVAC890 GLORY EN LDS LASER SLAM ROBOT VACUUM CLEANER USER MANUAL EN-DE-FR Thanks for using Mamibot product. Please kindly be aware of that this manual is made for our two versions of EXVAC890, with different configurations: Version 1.: EXVAC890 GLORY Dust Collector Version (with CRAFT-X) Version 2.: EXVAC890 GLORY General Version (Without CRAFT-X) Please subject to the exact product you buy from your sellers accordingly. 20210726Ver.
Thanks for purchasing Mamibot Laser Slam robot vacuum cleaner EXVAC890 GLORY. We hope GLORY will bring you a smarter and more convenient lifestyle. If you encounter any problem not mentioned herein, please contact sales@mamibot.com. For more details, please visit our official website: http://www.mamibot.com. Mamibot Please read all instructions before using this product, and keep it properly for future reference.
Table of Contents 2 Safety Instructions To know GLORY 5 6 Features of GLORY Specification 7 8 11 14 What’s in the package GLORY Components Remote Control GLORY Working Mode To use GLORY 16 18 19 21 25 27 Notice before use Start/Stop/Pause/Sleeping Charging your GLORY Wi-Fi Setup and APP Connecting How to Set the Clock/Sechdule How to use Water Tank 28 28 30 31 31 32 Cleaning and Maintenance Clean the Side Brushes Clean the Dust box Clean the Water Tank Clean the Rolling Brush Clean other Parts Clea
Safety Instructions Please read all instructions carefully, and keep it at hand for setting up, using and maintaining GLORY. Any operation that against the following instructions may damage GLORY or cause injury. Notes for Main Unit and Components Warning 01.Do not disassemble,repair or refit GLORY without authorization; otherwise it may damage GLORY or pose a hazard. 02.Do not use the product in an environment with risk of fire or explosion. 03.
09.Before using GLORY, please remove all vulnerable items on the floor, such as glass, lamps, and items such as wires and curtains that may entangle with the side brush and suction passages. 10.When the dust box is full, please empty it in time. 11.Please do not use GLORY to clean the construction waste. 12.The operating temperature of the product ranges from 0℃-40℃; please do not use it in a high temperature environment. 13.
07. Put the recycled batteries in the recycling bins set up by the community, hotels, schools, large shopping malls, supermarkets, etc or the hazardous trash can be collected by professional recycling agen -cies. Discarded batteries must be removed and disposed in accordance with local laws and regulations. Warning 01. When skin or clothing is exposed to the battery electrolyte, immediately wash with clean water to avoid inflammation of skin, etc. 02. Do not use the rechargeable battery on other devices.
To know GLORY Features of GLORY Laser & Gyroscope Navigation GLORY works under the navigation of Laser localization. It can greatly lower the rates of repeat cleaning or missing cleaning, enhance the cleaning coverage & efficiency. Mamibot Visualable Working Map Users can see how GLORY plan the cleaning path via APP, and get to know the cleaned areas or to be cleaned areas. It makes the cleaning work more intuitive and clearer.
Specifications Mamibot Product Model EXVAC890 GLORY Size of Main Unit 330*98 mm Net Weight 3.3KG Input 19V Power Consumption 60W Battery Type Rechargeable Li-ion Battery Battery Capacity 5200mAh Battery Voltage 14.4V Dust Box Capacity 450 ml Water Tank Capacity 370 ml Working Time 62-215 mins Charging Time 300-360 mins Control APP & Remote Control & Physical Press 1.0A ※ The data come from the lab of Mamibot Manufacturing USA Inc.
What’s in the package Mamibot GLORY Charging Base Remote Control Power Adapter Cleaning Tool Water Tank Side Brushes(x4) Additional High-efficient Filter (HEPA) ot Mamib Additional Foam Filter Notice: Dust Collector will only be supplied for the EXVAC890 GLORY Dust Collector -CRAFT X Version. Charging Base will only be supplied for the EXVAC890 GLORY General Version (Without CRAFT X).
GLORY COMPONENTS Bumper Wi-Fi Indicator Recharge Button Auto Cleaning Start /Stop Button Lidar Mamibot TOP Universal Wheel Charging Pole Mamibot Model No.: EXVAC890 Adapter Input: 100-240V~ 50/60Hz Adapter Output: 19V 1.0A Battery: 14.4V 5200mAh Made in China, Designed in U.S.A Anti-falling Sensor Side Brush EAN Code: 6-970626-160591 Please only use original EXVAC890 GLORY charging station for recharge. Manufacturer: Mamibot Manufacturing (Shanghai) Co.,Ltd. Address: North 21th,No.
am M o ib Infrared Sensor t Dust Box/Water tank Release Button DC Power Socket Main Power Switch (On/Off) SIDE (Turn on it before any operation is excuted) Pre-Filter (washable) High-Perfomance Filter (HEPA) (Can not be washed) Foam Filter (washable) Dust Box Cover (Can not be washed) Note: If there is dust collector sensor on the dust box,the dust box can not be washed.
Sealing Cap Release Button Water Tank Mopping Cloth WATER TANK Status Indicator DC Power Socket Charging Pole CHARGING BASE/DOCK For EXVAC890 GLORY general Version ot mib Ma AC Power Socket Status Indicator Dust Collector Sensors(Built-in) Charging Pole Suction Port DUST COLLECTOR For EXVAC890 Dust Collector-CRAFT X Version *** Dust Collector will only be supplied for the EXVAC890 GLORY Dust Collector -CRAFT X Version.
Remote Control Power On/Off Display Screen Auto Cleaning Auto Charging Confirmation Direction Button Turbo Mode Clock Setting Spot Cleaning Schedule Setting • Install 2xAAA batteries before using the remote control for the first time. Please remove the battery if users don’t use the remote control for a long time. • The commander from the remote control may not be able to be recoganized by GLORY if it is in the vicinity of the charginig base or physical vitual wall.
Power on/Off Press this button to power the GLORY On or Off. Auto Cleaning Button Press this button to enter the Auto Cleaning mode. Auto Charging Press this button to enter the Auto Charging mode, and the screen displays on remote control. Forward /+ Press this button to continue moving forwards in standby model, release it to return to standby mode. Press this button to increase the number at the Schedule setting mode, Back /Press this button, robot will rotate 180 degrees.
Schedule Setting Press this button to set the schedule when in standy mode, the icon will flash, and press this button or Confirmation button to save the data and exit, then the icon will always display on the screen. Press this button for 3S to cancel the Schedule, and the icon will disappear. Spot Cleaning Press this button to enter the Spot Cleaning mode.
GLORY Working Mode Auto Cleaning The Laser of GLORY will explore one part of the room first, then start to clean the detected room in ”Zigzag” path. After the detected area cleaning is finished, GLORY will explore other new areas for next plan until the whole room cleaning is completed. GLORY works in Auto cleaning mode when press the Start/Stop button on GLORY, or the Auto cleaning button on the remote control, or the Start button on the App.
Resume from Breakpoint GLORY will go to the charging base for recharging when the battery power is lower than 20%. After the charging status reaches 80%, GLORY will go back to the breakpoint where it was stopped earlier to continue the cleaning. Breakpoint Mamibot Recharging Reposition GLORY will set up a map of its path when cleaning. If users suspend GLORY and move it to other areas, then press the Start/Stop button, GLORY will reposition.
To use GLORY Notice Before Use M ot ib am ot ib am M • Please make sure all furnitures are properly organized to prevent GLORY from getting stuck. • Please set the forbidden area or fences at the stairway or similar areas. Anti-falling sensors may work less effectively if it works on the dark-colored floors or it is dirty.
ot ib am M • Do not stand around at the narrow spaces, such as thresholds or aisles, or it will lower the coverage rate of cleaning. • GLORY may climb on top of objects less than 1.8cm/0.70in in height, please remove the similar objects if possible. am M ot ib ot ib am M • Please remove the power cords, wires, toy or shoes that may entangle GLORY on the floor. • Do not clean the carpet in mopping mode.
Start / Stop Cleaning Mamibot • Make sure the main power switch at right side of GLORY is turned on. • Press the Start/Stop Button or the Auto Cleaning Button on the remote control, or press the Confirmation Button on the remote control, or the Cleaning Button on APP to Start/Stop GLORY. Pause/Standby The pause function is to switch the robot from the operating mode to the selected mode, and the robot can be paused by the following operations: 1). Press the Start/Stop Button on GLORY to pause it. 2).
Charging your GLORY • Remove all objects within 1m/3.3ft of the left and right side and 2m/6.6ft of the front of the charging base or dust collector. Mamibo t 0.05M 1M 2M 0.05M 1M How to place the charging base or dust collector? • Please do not forget to turn the main power switch on before use. • GLORY will be in Sleep mode if the standby time is more than 10 min.
Charge Method B: Mamibot • Connet the adapter with the DC socket of the charging base, attach GLORY to the charging base by aligning its charging poles with the charging poles on the base. • Connet the AC power socket well, attach GLORY to the dust collector by aligning its charging poles with the charging poles on the base. • The LED indicator on the dust collector will be slowly flashing white if it is switched on properly.
Wi-Fi Setup Requirements Before Wi-Fi setup, please make sure that GLORY and your Wi-Fi network meet the following requirements. 1. The Wi-Fi Network you are using is 2.4GHz router or a dual-band router. GLORY does not support 5GHz frequency band. 2. The Wi-Fi network you are using supports 802.11b/g/n and IPv4 protocol. 3. Please make sure that there is no illegal character in your SSID, or the Wi-Fi may not be recognized. 4. Please don’t use a virtual Private Network(VPN) for connection. 5.
Fig.3 Fig.4 Fig.5 Fig.6 Fig.7 Fig.8 To use 2.4Ghz to connect the wifi as Fig.10, input the wifi or personal hotspot password, next enter into the interface of Fig.11, choose the “AP Mode”and press the Start button on the robot for 3 seconds until the WIFI icon flashes slowly, then go to next as Fig.12. Connecting the ※ The interface may be slightly different from the final product, please subject to the actual products.
Fig.9 Fig.10 Fig.11 Fig.12 Fig.13 Fig.14 hotspot “SmartLife XXXX”,then go back to the app connection interface as Fig.13 and Fig.14,after connection finished, tap the main interface “Mamibot EXVAC890” as Figt.16, then enter into Fig.17. 3. Control the GLORY via App. A). On the interface, users can check the working status, cleaning map, the cleaning time,the sweeping or mopping area, the electricity.
Fig.15 Fig.18 Fig.16 Fig.19 Fig.17 Fig.20 Room Edit, Setting as Fig.17, Fig.18. B). Click the Room Edit, users can merge or split the room or name the room,or custom the room as Fig.19. Click the Forbiden Edit, users can set the Not to go aera or virtuall wall as Fig.20. Users can also click other buttons on the interface to control the robot. C). Click the “Setting” button and enter into the interface of Fig.
Fig. 21 Fig. 22 Fig. 23 D). Click “ ” and enter into the interface Fig.23, users can also get to know the guides of connecting GLORY to the third-party Apps, such as Alexa, Google home,etc, to create group, to check device network or update the firmware of the robot or remove the device. *The operation guides or the interfaces may be improved irrgularly without prior notice or obligation, please connect or control robot according to the final version.
How to set the schedule • Press the Schedule Setting Button to set the schedule, press the Left or Right Button to set the appointed cleaning time for GLORY. (GLORY will start cleaning at 8:30 a.m. automatically every day if the Scheduled time is 8:30 a.m. in the standby mode) • You can also set the Schedule time on APP. ※ Attention • Please keep the main power switch on so that GLORY can do the cleaning work at scheduled time.
How to use water tank • Attach the microfiber mop to the vlecro at the bottom of water tank. • Remove the sealing cap from the water tank and fill it up with clear water, then cover it. Ma mib ot • Release the button on the dust box and take it out, release the button on the water tank and fix it on GLORY. • Mopping your floor via APP or Remote control. ※Attention • Do not put the water tank on GLORY when charging. • Do not add dirty water or corrision/flammable liquid into water tank.
Cleaning and Maintenance Clean the Side Brushes • The side brushes can be bent or damaged after being used for a period time. Pull off the side brushes and clean them with the cleaning tool or soft mop, or replace them with new side brushes. • Please make sure the L and R side brushes correspond to the L and R on GLORY. • The side brushes can be reshaped with hot water if deformed. (Please take care of yourself to avoid being scalded by hot water).
• Remove the pre-filter by pulling the hooks on the pre-filter. Pre-filter • Take out the foam filter and HEPA from the dust box(a). • Clean the HEPA only with the cleaning tools, do not wash the HEPA with water(b). • Clean the dust box, pre-filter and foam filter with the cleaning tools . (a) (c) (b) Ma mib ot • Dry the dust box, pre-filter, foam filter, do not exposure the HEPA and filters to the sun(d). • Put the foam filter, pre-filter, HEPA back together into the dust box.
Clean the Water Tank • Pull the water tank off from GLORY, and release the lock button. • Remove the mop from the water tank, and wash it with clear water, then dry it(g,h). • Pour the rest water in the water tank out, and clean it with soft cloth(j,k).
Clean the Rolling Brush • Release the brush guard and pull out the rolling brush(1). • Clean the rolling brush with cleaning tools(2). (2) (1) Clean other Parts • Clean the Anti-falling sensors with soft cloth. • Clean the Bumper and Infrared sensors with soft cloth. • Clean the charging pole on GLORY and charging base with soft cloth. • Pull out the Universal wheel and clean the hair or debris wrapped or entangled with the wheel, then reinstall it after cleaning finished.
Cleaning / Replacement Frequency Recommended Part Cleaning / Replacement Frequency Recommended Side Brushes Cleaning every month; Replacment every 3-6months. Rolling Brush Cleaning every month; Replacment every 3-6months. Dust Box Cleaning after each use. HEPA Pre-filter Foam Filter Cleaning every 2-3 times use; Replacement every 3-6months. Cleaning every 2-3 times use; Replacement every 3-6months. Cleaning every 2-3 times use; Replacement every 3-6months.
Troubleshooting Problems GLORY can not be charged GLORY can not be activated. The remote control does not work. Solutions • Make sure the adapter is connected with power supply and charging dock correctly and the indicator lights up. • Clean the charging poles on charging base and GLORY with dry and soft cloth,then charge again. • Charge GLORY via adapter directly. • Make sure the main power switch is turned on. • Make sure GLORY is fully charged.
Problems The working path and map of GLORY is abnormal. GLORY can not connect to Alexa or google home. Solutions • Remove the objects, such as cables, shoes from the floor. • Clean the Infrared sensors and bumper with soft cloth. • Keep the wheels dry, the path of GLORY will be abnormal if the wheels are wet. • Upgrade the latest version of firmware through APP setting. • Reboot GLORY by turning off / on the main power switch. • Make sure users have installed Alexa or google home app.
GLORY Anatomy Top glass cover Lidar Side Brush Gearbox Side Wheel Gearbox Top Shell Vacuum Motor set Side Brush Universal Wheel Bottom Shell Rolling Brush Gearbox Dust Box Li-ion Battery Water Tank Battery Cover Notice: GLORY is only for indoor cleaning, it works well on the hard floor, wooden floor,marble floor or short carpet floor. Please also keep regular cleaning for GLORY.
Name and Content of Hazardous Substances Content of Hazardous Substances Component Adapter Electronic Components Rubber Components Plastic Shell PCB Cables Metal Parts Cadmium(Cd) O O O O O O O Lead(Pb) O O O X O O O Mercury(Hg) O O O O O O O Hexavalent Chromium (CrVI) O O O O O O O Polybrominated Biphenyls(PBB) O O O O O O O Polybrominated Diphenyl Ethers (PBDE) O O O O O O O Bis(2-ethylhexyl) Phthalate(DEHP) O O O O O O O Butyl Benzyl Phthal
Recycling of GLORY at the end of its lifespan: The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. Byensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
