Manualshelf

User Manual

ManualsBrandsMamiya ManualsDigital CamerasLeaf Credo 80MP Digital Back Kit with 645DF Medium Format DSLR and 80mm f/2.8 LS D Lens
121122123124125126127128129130
127
15.6 Hasselblad 501 CM and 503 CW without Winder
The Leaf Credo back can also be used with mechanical Hasselblad
cameras such as the 501 CM and 503 CW. These cameras are operated
in single shot mode via the shutter release button or a standard cable
release.
WARNING! Please note that the Leaf Credo back should not be
mounted when the camera is set to Mirror Up. Also ensure that the lens
is not jammed or locked open on the B setting when connecting the
flash sync cable to the Leaf Credo back.
Shutter Latency Setting
While using a mechanical Hasselblad, set the latency setting to Normal
on the Leaf Credo. When using the Mirror Up function or if you need
to rapidly press the shutter button, set the latency setting to Zero.
Precautions must be taken not to trigger the shutter too fast when using
Normal latency.
15.7 Hasselblad 503 CW with Winder CW
WARNING! Please note that the Leaf Credo back should not be
mounted when the camera is set to Mirror Up. Make sure that the lens is
not jammed or locked open on the B setting when connecting the flash
sync cable to the Leaf Credo back.
Set the Shutter Latency to Zero when using a 503 CW winder with a
Leaf Credo back.