User Manual

58
5.5 Custom White Balance
To create a new custom white balance, first capture a reference white
balance image. (Try to use a gray card or neutral white surface). After
selecting the full screen image, select the Dynamic menu and press the
White Balance Picker icon. (Ensure that the image is in full screen view.)
Zoom in and pan to a desired part of the image and then tap on a white/
gray area to create a custom WB. A crosshair icon appears on the
screen. You can continue to pick a WB point elsewhere in the image until
you are satisfied with the generated WB.
Tap the WB icon and the Save WB as: screen appears. Select Custom
1, Custom 2 or Custom 3 option. The custom white balance is set and
all subsequent captures use this WB setting.
The Leaf Credo back enables you to create and store up to three custom
white balance settings.