User Manual

69
Orientation
The Orientation tool helps keep the attached camera in a perfect
horizontal or vertical position. Tap the Orientation tool at the bottom left
of the Tool view screen to make it appear full screen. Tap the screen or
tap the Back button to return to the Tool view.
Long tap the Orientation tool to alter the tool’s settings. Users can
choose either an illustrative Virtual Horizon or numeric roll and pitch
Values by tapping the option.
Tap On to get an audio alert that signals that the camera is level.
Orientation Offset Adjustment (Roll and Pitch)
The electronic Orientation tool may be calibrated for Roll and Pitch offset.
It can be accessed by pressing and holding the Level icon in Tools
view.
After levelling your camera, press the OK button to store your custom
setting, then press Close. To revert to the factory setting select OFF.