Manualshelf

User Manual

ManualsBrandsMamiya ManualsDigital CamerasLeaf Credo 80MP Digital Back Kit with 645DF Medium Format DSLR and 80mm f/2.8 LS D Lens
81828384858687888990
85
7.15 Restore to Default
Select Restore to Default to restore the Credo unit back to its default
factory settings. Tap OK to confirm restore. Caution! All previous settings
are lost.
7.16 Firmware
It is important to keep the Credo’s firmware up-to-date to ensure you
get new features and remove any bugs or errors from previous firmware
versions.
1. Download the latest firmware update from
www.mamiyaleaf.com/firmware.asp
2. Transfer the firmware (.fwr) file to a CompactFlash (CF) card and
insert it into the Credo’s CF card slot.
3. From the Home screen, select Settings.
4. Scroll to the fourth screen and select Firmware > Update Firmware.
It is not possible to update the firmware unless the digital back battery
is fully charged. A warning screen appears if the battery capacity is
too low. Tap the arrow to install the firmware.
5. Ensure that the Leaf Credo back has been removed from the camera.
A progress bar appears on screen during installation.
6. A confirmation screen appears once installation is complete.
The Leaf Credo back automatically restarts itself.