Specifications

25 26
Setting Date and Time
1. Turn on the power.
Set the shutter release mode selector lever to
“S” or “C.”
2. Hold down the exposure mode dial lock-
release button and turn the exposure mode dial
to the CF position.
3. Turn the front dial to select custom number C-
35.
The display will immediately show C-35.
Turn the dial on either side to select a custom number.
4. Press the set button
After pressing the set button , the display will change to the date setting mode.
5. Turn the front and back dials to set the date
and time.
Turn the front dial to select "month-date-year"
or "hour-minutes-seconds" and change the
value by turning the rear dial.
6. After the date and time are set, press the set button for approximately one
second to store the settings.
If you stop pressing buttons or turning dials while changing settings for 60 seconds
or more, the camera will automatically exit the setting mode and any changes to the
current setting will not be stored.
When not in the CF exposure mode, if the set button is pressed for approximately
two seconds the display will show the index number. Press the set button again to
check the date and time.