Instruction manual

8. Releasing the Shutter
It is best to become aquainted with the
method of releasing the shutter before
actually putting film in the camera.
1.
Rotate the shutter release lock ring until
the mark on it is aligned with the white
dot on the body.
2.
Remove the dark slide or pull it out until
all the triangular holes become visible.
3.
Push the multiple exposure lever on the
roll film holder forward to the multiple
exposure position
- i.e. until the red
mark is visible.
4.
Push the cocking lever all the way down.
5.
Press the shutter release button.
The
first steps can be done in any order. After
you are thoroughly familiar with the above
steps, return the multiple exposure lever to its
normal setting.
16