User manual

INSTALLAT ION
mini HE --- Installation & Servicing
17
For the correct use of the restrictors with twin pipes refer to
the following diagram for the models mini HE C24,andmini
HE C28.
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
0 2 4 6 8 101214161820222426283032
Restrictor
50 mm
Allowed values
Flue exhaust ”a”
Air intake ”b”
Restrictor
55 mm
Refer to the following diagram for the model mini HE C32.
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
0 2 4 6 8 101214161820222426283032
Restrictor
50 mm
Allowed values
Flue exhaust ”a”
Air intake ”b”
Cutting lengths of flue and air ducts
Measure the wall thickness and, when using a side outlet, the
gap between the inner wall and the boiler side casing. Use
the following chart to calculate the cutting lengths of both flue
and air ducts.
Marktheairductandflueduct making reference on the
groove.
Groove
Groove
Twin Pip e
Air duct
Rear Outlet W all thickness + 130 mm
Rear outlet+Stand ---off W all thickness + 165 mm
Side Outlet --- RH W all thickness + Gap + 187 mm
Side Outlet --- LH Wall thickness + Gap + 93 mm
Flue Duct
Rear Outlet W all thickness + 130 mm
Rear outlet+Stand ---off W all thickness + 165 mm
Side Outlet --- RH Wall thickness + Gap +67 mm
Side Outlet --- LH Wall thickness + Gap + 213 mm
12 REAR FLUE ASSEMBLY
Legend
1 Wall finishing gasket --- external (rubber)
2 Self tapping screw 4,2x13
3 Flue turret
4 Boiler---turret gasket
5 Fluepipegasket
6 Turret---air pipe gasket
7 Centring spring
8 Air/flue pipe with terminal grille assembly
9 Wall finishing gasket --- internal (plastic)
1
8
9
7
6
5
4
3
2
INSTALLATION