Capture One 5.2.1 Release Notes Introduction Capture One 5 is a raw converter and workflow software which enables photographers to reduce the time and effort required to deliver stunning ready-to-use images with excellent color and detail. Capture One is designed to create the best image quality in the market and holds a series of easy-touse tools created to match the professional photographer’s daily workflow.
Highlighted new features This new release of Capture One comes in three versions: 5.2.1, 5.2.1 PRO and 5.2.1 DB. Capture One 5.2.1 is a free service release to existing Capture One 5.x owners. Capture One 5.2.1 is a paid upgrade to customers with Capture One 4.x and 4.x PRO and a free upgrade to customers with Capture One 4.x DB. Capture One 5.2.1 PRO/DB is a major upgrade to the respective versions of Capture One 3.x. Existing customers with Capture One 3.
System requirements Capture One 5.2.1 may run on other and older equipment than what’s listed below but to ensure the best possible results we recommend that your computer at minimum conforms to the following specifications: Microsoft® Windows®: • • • • • • • • Intel® Pentium® 4 or better 2 GB of RAM 10 GB of free hard disk space Calibrated color monitor with 1280 x 800, 24 bit resolution at 96dpi screen ruling Windows XP® SP3, Windows Vista® SP2, Windows 7®. Microsoft® .NET Framework version 3.
Installation Capture One 5.2.1 is compatible with previous 4.x versions. If you upgrade from 4.5.X, 4.6.X, 4.7.X or 4.8.X versions, the settings are unchanged, and will be reused. Version 4.0 and 4.1.X settings will be upgraded automatically. Version 3.X settings are not supported or possible to migrate. If you want to keep your existing versions of Capture One 4 you can install this newer version of Capture One 5 in a different location.
RAW file support Capture One 5.2.1 DB supports RAW files from the following digital backs/cameras: Phase One: P 65+, P 40+, P 45+, P 30+, P 21+, P 25+, P 20+, Achromatic+, P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 101, H 10, H 5, LightPhase. Mamiya: DM56, DM40, DM33, DM28, DM22, M31, M22, M18. Leaf: Aptus-II 10R, Aptus-II 10, Aptus-II 8, Aptus-II 7, Aptus-II 6, Aptus-II 5, AFi-II 10, AFi-II 7, AFi-II 6. Additionally Capture One 5.2.1 / 5.2.
Tethered camera support Capture One 5.2.1 PRO/DB has tethered support for the following digital backs/cameras: Phase One: P 65+, P 40+, P 45+, P 30+, P 21+, P 25+, P 20+, Achromatic+, P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 101, H 10, H 5, LightPhase. Mamiya: DM56, DM40, DM33, DM28, DM22, M31, M22, M18. Leaf: Aptus-II 10R, Aptus-II 10, Aptus-II 8, Aptus-II 7, Aptus-II 6, Aptus-II 5, AFi-II 10, AFi-II 7, AFi-II 6. Additionally Capture One 5.2.
Known issues Below you will find a list of known issues for Capture One 5.2.1 at the time of shipping. General: • Live View for P 65+ and P 40+ requires a Digital Back firmware update, which enables Live View support. • Using a large preview image size will affect performance. • ICC version 4 profiles and some ICC version 2 profiles are not supported for Mac OS Leopard, Windows 7 and Windows Vista.
Mac: • • • • • Shooting tethered with some Canon cameras on Mac OS 10.6.4 may for some hardware configurations, sporadically hang the application during image transfer for up to about 2 minutes. No such issues have been observed on Mac OS 10.5.8. When you have disconnected a camera do not reconnect a camera until the Camera tool status changes to "No Camera Attached". Certain version (e.g. 2.4) of the Logitech Control Center may conflict with the tethered capture functionality of Capture One.
Troubleshooting and support For troubleshooting assistance and support please refer to our on-line resources at: http://www.phaseone.com/support Trademarks Capture One and Phase One are registered trademarks of Phase One A/S in the European Union and other countries. All other trademarks are the property of their respective owners.
