Specifications

When the lens is installed on the camera while the mirror and the
shutter are not set.
Lens installation is possible even if the
However, when the shutter release button
mirror and/or the shutter are/is not set;
however, operation shown in the table must
is necessarily pressed with the roll film
be followed to obtain a normal set condition.
holder attached, as shown in “1” of the table,
In this case, do not pull out the dark slide of
move the multiexposure lever forward and
the film holder until the camera is set to a
slightly pull out the dark slide, and then
press the shutter release button.
normal condition.
Mirror condition
; Shutter blade condition
Operation
fl &-q F q&
Opened or Closed
35