Manual

12
MAMM-WSHP-IOM-1MA (November 2011)
MAMMOTH DDC CONTROLS
I/O Flex 6126
The standard factory-integrated DDC controller pro-
vides control flexibility that can be easily customized to
meet any sequence of operation needs. It is fully capa-
ble of operating in a 100% stand-alone mode or can
connect to a Building Automation System (BAS) using
any of today’s four leading protocols: BACnet, Modbus,
N2, and Lontalk. The base controller provides ample
input/output capacity, plus support for an expander
board if additional I/O capacity is required.
Key Features and Benefits
 6160 I/O points: 6 digital outputs, 12 universal inputs, and 6 analog outputs.
 8160 I/O points: 16 universal inputs, 8 digital outputs.
 Optional built-in protocol support: BACnet® (ARCNET, MS/TP, and PTP modes), Modbus® (RTU and ASCII
modes supported), N2, or Lontalk®.
 Powerful, high-speed 16-bit microprocessor with 1 MB Flash memory and 1 MB of battery-backed RAM
 Built-in support through an Rnet port for control’s custom configurable keypad/display unit, BACview6 (4-line by
40 character per line display) for intelligent sensors.
 For variable air volume (VAV), constant volume (CAV), and make-up air (MAU) applications.