Operation Manual

Mando Footloose user manual
16
English
A new way of moving
17
F-7
Battery and charging
How to check the charging status
1. How to check the charging status
1) Indication by the charging lamp
2. Troubleshooting
1) Power LED is not ON
- Check if AC power is ON and if the power cord is plugged properly.
2) Red LED is not ON while charging the battery
- Check if the charger port is properly plugged.
3) Red LED does not change to green LED while charging the battery
- Check whether the room temperature is at the optimal temperature. If red
LED is still ON at the optimal temperature, it indicates that the battery has
a failure - contact the store.
4) Red LED changes to green instantly
- It indicates that the battery is fully charged. Otherwise, it indicates that the
battery has a failure - contact the store.
5) Green LED is ON even though the battery is not fully charged
- Repeat recharging the battery after completely discharging 2~3 times. If
you still have the same problem, contact the store.
Even though charging may begin normal-
ly, it may be discontinued when the bat-
tery temperature exceeds the possible
charging temperature in order to protect
the battery. In this case, cool down the
battery and charge the battery again at
a cooler place
Despite the battery is at between 0~
30°C, if the battery is charged at a place
exposed to direct sunlight or directly after
a ride, charging cannot be initiated
because the interior temperature of the
battery is out of the possible charging
temperature range.
2A General
Charger
4A High-speed charger
Left Lamp Right Lamp
Power Off Off Off Off
Standby Red Red Off
In Progress Red Red Red
Completed Green Red Green
F-8
Time to Charge
Using a general charger, it usually takes about 5.5 hours when the
battery icon on the HMI screen is completely empty (it takes about 3
hours when using a high-speed charger, sold separately).
* The time to fully charge a battery varies with the condition of the battery and the room temperature.
If you find any problem while charging a
battery, turn off the power of the charger
immediately, disconnect the charging
plug of the charger from the product, and
unplug the power cord from an electric
outlet.
* Charging a battery that has not been
used for a long period of time may
take longer and as long as the red
LED is ON, you may consider it as
working properly.
Charging Instructions
F-6
Battery and charging
Do not disconnect the charging plug from Mando Footloose while charging. It may
cause false operation or a failure.
If charging does not begin properly, turn off the power of the
charger and retry charging.
1) Ensure that the power of the charger is
‘OFF’. Plug the power cord into an
electric outlet.
4) Charge (the red lamp of the charger
is ON).
7) Disconnect the charging plug from
Mando Footloose.
2) Connect the charging plug to Mando
Footloose.
3) Turn on the power of the charger.
5) Charging completed (the green lamp of
the charger is ON).
6) Turn off the power of the charger.
8) Unplug the power cord from the electric
outlet.
2. 4A High-speed Charger
1) Plug the power cord into an electric
outlet.
2) Connect the charging plug to Mando
Footloose.
4) When charging is completed (the green
lamp of the charger means ON), disconnect
the charging plug from Mando Footloose.
3) Charge (the red lamp of the charger
means ON).
5) Unplug the power cord from the electric
outlet.
1. 2A General Charger