User's Manual

Connecting the Wires to the Terminals

Connect the previously labeled wires to the corresponding

terminals, matching the designations. Use a screwdriver to

loosen the terminal, wrap the wires around the terminal then

tighten to securely fasten the wires. Make sure the wires do

not touch or short-circuit with other terminals.

Depending on your heating/cooling equipment, you may need to connect between 2 to 7 wires

If you have two ‘R’ wires, then connect each wire to its corresponding terminal and remove the

JUMPER between the RC and RH terminals

If you are unsure of the connections please consult a certified HVAC contractor for the correct

installation of your thermostat.