User's Manual

Press MODE until the HEAT symbol appears

Press PROGRAM once (P1 and the PROGRAM symbol will appear on the display)

Press PROGRAM again to scroll through the day(s) you wish to program

(Monday - Friday mode will display first, then Saturday, then Sunday)

Press AHEAD or BACK to scroll to the desired start time for Period 1 (displayed as P1)

Press UP or DOWN to set the desired temperature for P1

After setting the desired time and temperature for P1, press PROGRAM again to advance to P2

Repeat the steps above to set the times and temperatures for P2, P3 and P4

After Sunday P4 is set, press PROGRAM again to exit the programming mode

Heating Program

- The heating and cooling programs are linked, so same program start times

(chosen for either heating or cooling) will automatically be applied to the other

- The HEAT temperature setting will always be at least 3°C (6°F) lower than the COOL temperature

setting, to prevent a mistake or overlap in temperature settings

- The PROGRAM button can also be used at any time to review all the set programs

- Tip: Press and hold down the AHEAD/BACK or UP/DOWN buttons to scroll through the numbers quickly

- Program times can be set in increments of 10 minutes

- Temperature can be set in increments of 0.5°

- The temperature range for heating is 5°C to 32°C (41°F to 89°F)