User's Manual

Setting the cooling program is nearly identical to setting the heating program

Press MODE until the COOL symbol appears

Press PROGRAM once (P1 and the PROGRAM symbol will appear on the display)

Press PROGRAM again to scroll through the day(s) you wish to program

(Monday - Friday mode will display first, then Saturday, then Sunday)

Press AHEAD or BACK to scroll to the desired start time for Period 1 (Displayed as P1)

Press UP or DOWN to set the desired temperature for P1

After setting the desired time and temperature for P1, press PROGRAM again to advance to P2

Repeat above steps to set the times and temperatures for P2, P3 and P4

After Sunday P4 is set, press PROGRAM again to exit the programming mode

Cooling Program

- The heating and cooling programs are linked, so same program start times (chosen for either heating

or cooling) will automatically be applied to the other

- The COOL temperature setting will always be at least 3°C (6°F) higher than the HEAT temperature

setting, to prevent a mistake or overlap in temperature settings (For example, if the initial COOL

program temperature was set at 24°C (75°F) and you decide to adjust the HEAT program temperature

to 24°C (75°F), the thermostat will automatically push the COOL program temperature up to 27°C (81°F)

- The temperature range is 8°C to 35°C (48°F to 95°F) for cooling