User's Manual

For automatic control of the fan, press FAN until the AUTO symbol appears

In cooling mode, the fan starts/stops with the cooling equipment

In heating mode, the fan is controlled by the heating equipment

There may be a few minutes of delay between the fan setting selection and the fan becoming activated

For the fan to run continuously, press FAN until the ON symbol appears

For the Automatic Ventilation feature - where the thermostat will turn the fan on periodically

for better ventilation press FAN until the VENT symbol appears

Press MODE to toggle between the modes

HEAT - The system is in HEAT mode and furnace or heating system is activated

COOL - The system is in COOL mode and air conditioner or cooling system is activated

OFF - If the thermostat is in the OFF mode, both the heating and cooling systems will be turned off,

and all programs will be disabled

When the heating or cooling systems are ON, the following symbols will display:

will flash when the heating system is running

will flash when the cooling system is running

Fan Control / Ventilation

System Mode: HEAT / COOL / OFF