User's Manual

This function will change the temperature temporarily until the next program period starts

Press the UP / DOWN buttons to set the desired temperature

- The OVERRIDE icon will display, to indicate the OVERRIDE function is active

- If the system is in AUTO mode, only the currently active mode (heat or cool) setting will be changed

- The thermostat has an automatic delay function to protect the heating and cooling systems from

irregular on/off sequences, so there may be a delay of several minutes before the override

setting will activate the heating/cooling system

Temporary OVERRIDE

HOLD Function

This function will maintain a constant temperature until it is turned off by pressing HOLD again

Press the HOLD button

Press the UP / DOWN buttons to change the temperature

Press HOLD again to release the hold function

- The HOLD symbol will display when the HOLD function is activated

- The HEAT/COOL system mode cannot be changed while HOLD is on

- The HOLD function disables all program settings, and new temperature will then remain the same,

until the HOLD button is pressed again