User's Manual

Viewing the temperature of the remote transmitter:
The local and remote temperatures display alternates every 8 seconds on the thermostat LCD screen. To view the
remote transmitter temperature, press AHEAD on the thermostat. The temperature will be shown on the bottom
pane and the Remote Temperature Display symbol (antenna) will appear indicating the temperature displayed is
from the remote transmitter. If the bottom pane is already showing remote temperature (the Remote Temperature
Display symbol already on), pressing AHEAD key will show the local temperature of the thermostat.
Controlling the thermostat based on the remote transmitter temperature (Heating or Cooling):
The thermostat can heat or cool your home based on the temperature transmitted by the remote, instead of the
thermostat's own temperature. To begin, place the remote sensor in the part of the house you wish to use for
temperature control. Press the ON/OFF button on the remote transmitter until the Remote Temperature Control
symbol displays. The thermostat will now control the heating and cooling based on the temperature as sensed by
the remote transmitter. (Note: If the local temperature on the thermostat and remote vary by more than 4 degrees,
or either remote transmitter or thermostat battery is low, the remote function will be cancelled.)
Remote Override:
raise or lower the set temperature by up to 3 °C or 6 ° . Press the UP or DOWN buttons on
the remote override value displayed as a plus or
minus value on the LCD screen of the remote. It will also appear on the thermostat LCD screen, alternating with
the temperature .
Although the remote cannot permanently change the thermostat's program settings, it can temporarily override
the current program to F
to change the temperature in half degree increments. The will be
regular set on the thermostat
REMOTE SENSOR / TRANSMITTER
32