User's Manual

3
FRICTION ADJUSTMENT
2
The pantograph can be regulated to keep
suspended loads from
1 kg (2.2 lbs) to 18 kg (39.7 lbs) perfectly
balanced. By turning the notched ring “X”, you
can adjust the pantograph’s friction; this will
ensure that the load remains stable when set in
position, but that it will move smoothly up and
down when necessary.
PLEASE NOTE
The friction mechanism does NOT help lift the
load, it only holds the load in the desired
position and stops it from dropping downwards.
Use the appropriate springs to help with load
lifting. For further information, please refer to the
chapter "Choosing and Installing Additional
Springs".
-
+
X
2