Specifications

VIDEO HEAD ADAPTER BOWL 3114
Adaptor kit to connect a 75 or 100 mm half bowl video head to a flat
base tripod.
37
100MM HALF BALL 3141BALL
Half ball for leveling video heads on Video tripods provided with 100mm
bowl.
75MM HALF BALL 3284
Half ball for leveling video heads on Video tripods provided with 75mm
bowl.
SUCTION
CUP/RETRACTABLE
SPIKE FEET
A rubber section cup feet (set of 3)
with retractable stainless steel
spike. The suction cup increases
the footprint of the monopod by
almost 20 times, giving much
greater stability when needed.
The foot can be removed and
replaced at will.
055SCK2 for tripod: 3221WN, 745B,
745MF3, 755B
190SCK2 for tripod: old models of 3001BWN,
756B with 19mm leg diameter
190SCK2N for tripod: 3001BWN, 756B
440SCK2 for tripod: 756MF3
441SCK2 for tripod: 755MF3
SPIKE FOOT SHOES
Set of 3.
For tripod: 3186, 3193, 3182, 515MVB,
351MVCF, 525MVB
Special additional feet
A complete line of foot conversions to adapt our tripods and monopods to all type of terrains in order to give them the maximum stability possible.
055SPK2
190SPK2
190SPK2N
440SPK2
441SPK2
449SP2
676SP2
055SCK2
190SCK2
190SCK2N
440SCK2
441SC2
565
Accessories
100MM HALF BALL SHORT 500BALLSH
The 500BALLSH comes complete with a short locking handle to mount
all Manfrotto flat-base heads to the 529B Hi-Hat.
75MM HALF BALL SHORT 520BALLSH
The 520BALLSH comes complete with a short locking handle to mount
all Manfrotto flat-base heads to any 75mm bowl tripod including the
529B Hi-Hat (with optional adapter 3426).
100MM TO 75MM ADAPTER 3426
Converts all Manfrotto 100mm bowl tripods into a 75mm bowl.
SHORT HI-HAT LOCKING HANDLE 319SH
Short locking handle to mount all Manfrotto video ball heads to the 529B
Hi-Hat.
Manfrotto's new Hi-Hat enables you to get shots from the lowest possible
position. The 529B has adjustable leg angles to mount the camera in the
tightest or lowest of locations - and thanks to the built-in spreader you can
simply use the 529B on any even surface. The feet are rubber-padded to
protect delicate surfaces and have a hole so that the 529B can be screwed
to a ladder, apple-box or a sheet of wood. Recommended Heads: 519
(with 3426 adapter), 516 (with 500BALLSH adapter), 3460 (with 500BALLSH
adapter), 3433 (with 500BALLSH adapter), 3274.
5.7in 7.7in 8.1in 5.5lb 44.1lb 100mm
HI HAT 529B
500BALLSH 520BALLSH32843141BALL
MONITOR HOLDER 3152
Designed to hold a monitor mounted on a tripod by using a standard
5/8in stud. Straps hold monitor securely in place.
REVERSIBLE
SPIKED FEET
Reversible rubber/metal spiked
feet (set of 3) supplied with
a dedicated fixing tool.
The spike is made of a special
hard anodized aluminum alloy
extremely resistant to corrosion.
055SPK2 for tripod: 3221WN, 745B,
745MF3, 755B
190SPK2 for tripod: old models of 3001BWN,
756B with 19mm leg diameter
190SPK2N for tripod: 3001BWN, 756B
440SPK2 for tripod: 756MF3
441SPK2 for tripod: 755MF3
449SP2 for monopod: 559B
676SP2 for monopod: 558B
RUBBER/SPIKED
FOOT
Rubber foot for with retractable
metal spike.
For monopod: 557B
677SP