000010419 - 20/03/2019 Assembly Guide Model: 12GMC1 / 12GMC2 / 12GMC3 / 12GMC4 Floating Square Cabinet Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.
In order to ease the assembly, you should separate and identify the parts first Do not place the parts directly onto the floor. Use a cardboard sheet or a mat to place the parts, during the separation and assembly. IMPORTANT In order to avoid severe or even fatal injuries, follow the instructions carefully.
IDENTIFICATION OF PARTS IDENTIFY THE COLOR OF YOUR CABINET N° P1 P2 P3 P4 P5 P6 Dimension QUANTITY BLACK MATT WHITE MATT BLUE MATT GREY MATERIAL SIDE 1 DOOR SMART 3000009529 3000009526 3000009528 - STEEL 1 PC SIDE SMART 3000009069 3000009086 3000009096 - STEEL 1 PC DESCRIPTION LENGTH WIDTH THICKNESS 12.67'' 11.22'' 0.59'' 12.67'' 11.22'' 0.98'' CEILING 1 DOOR SMART 3000009074 3000009089 3000009100 - STEEL 1 PC 13.58'' 11.18'' 0.
P3 P1 P5 26 Lbs P2 P6 P4 Lbs Maximum weight supported distributed Hardware list F1 F2 F3 1000008297 1000008616 1000009033 1000000281 - WHITE 1000007352 - BLACK 1000010221 - BLUE Qty. 4 Qty. 4 Qty. 1 Qty. 4 F4 F5 F6 F7 F8 F9 3000008409 1000010136 1000008285 3000009645 - WHITE 3000009643 - BLACK 3000009649 - BLUE 3000009647 - GREY 1000008285 Qty. 1 Qty. 1 Qty. 2 Qty. 1 Qty.
01 1 - Attach the parts P1 and P2, under the part P5. Positioning the cut-out of part P5 over the safety grappel of parts P1 and P2.
01 03 1 - Identify the parts as figure below: P4 with hole and P3 with socket. P3 P4 1 - Slightly incline the part P4, and place it inside the cut - out of the parts P1 and P2. 2 - Slide part P4 into the folds of part P1, P2 and P5.
01 05 1 - With the end of F3, smash the safety claw, locking part P4 to part P1 and P5. 2 - Finish folding it mannually.
01 07 1 - Attach the P3 part onto the P1 and P2 parts. 2 - Check all the fittings, before continuing. P3 P5 P3 P1 P1 P2 P2 1 - With the end of F3, smash the safety claw, locking part P3 to part P1 and P4. 2 - Finish folding it mannually.
01 09 1 - Using the F5 template, make markings on the wall as indicated. 2 - It is necessary to use the level. 3 - Drill the wall over the marked points. 0° CABINET HEIGHT F5 ½” F5 IMPORTANT: CABINET MUST BE ATTACHED TO THE WALL USE THE CARDBOARD TEMPLATE TO FIX THE WALL CABINET ON THE WALL IT IS IMPORTANT TO USE A LEVEL 1 - Insert the metal part of the bushing into the hole until it overcomes the wall.
01 11 1- Insert the screw F2 into the hole on the wall. 2- Turn the screw clockwise, using the F3 part . 2x F2 F3 11 1- Approach the cabinet by fitting the F2 screw.
13 01 1 - Align the cabinet with the use of a level. 2 - Mark the wall through the holes in the bottom of the cabinet. 0° 1 - Move the cabinet away 2 - Drill the wall over the marked points.
01 15 1 - Insert the metal part of the bushing into the hole until it overcomes the wall. 2 - Pull the bushing driving it against the wall and then push the plastic ring until it leans close to the wall. WALL Plastic ring WALL F1 2X 3 - Break the bushing's rods 1 WALL WALL 2 WALL 1 - Position cabinet through the F2 screws that are already attached to the wall. 2 - Insert screw F2 through part P5. 3 - Turn the screw using the F3 part clockwise.
01 17 1 - Press part F4 against the heads of the F2 screws. 2 - Insert F5 into the hole in part P3.
01 19 1 - Attach part P6 to the bottom of the cabinet through part F6 2 - Finish engaging part P6 through the pivoting wrench as shown below. P6 P6 P6 1 - Attach the F7 into the P6 holes..
01 21 IMPORTANT: REMOVE THE RIBBON TO FINISH THE ASSEMBLY 1 - Glue F8 to part P6 in the indicated area. F9 P6 F9 1X TAKING GOOD CARE OF YOUR CABINET Cleaning and caring instructions: - Avoid dragging objects on top of the cabinet. They might scratch the finishing. - Only non-abrasive natural chemical products are recommended to clean your cabinet. Simply wipe the cabinet down with a wet cloth to remove the cleaning product excess.
WARRANTS TERMS This product has the guarantee for a period of twelve (12) months, this limited warranty is effective from the date of the original consumer purchase. Proof of original purchase date is required to obtain service or replacement under this limited warranty. Once the defect of manufacture has been verified, the consumer should contact the store where he purchased the product. In the warranty period, any defective parts will be replaced free of charge by another of the same line and model.
