000008344 - 15/03/2018 ASSEMBLY HANDBOOK – FORTRESS GARAGE TABLE 6GMC Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.com View our assembly video online www.manhattancomfort.
In order to ease the assembly, you should separate and identify the parts first Necessary hardware for the assembly * Included in the kit Do not place the parts directly onto the floor. Use a cardboard sheet or a mat to place the parts, during the separation and assembly. Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.com View our assembly video online www.manhattancomfort.com IMPORTANT In order to avoid severe or even fatal injuries, follow the instructions carefully.
ASSEMBLY HANDBOOK – FORTRESS GARAGE TABLE P34 Top 3100013836 300 lb P29 Back 3000007402 P32 Left Frame 3000007398 WARNING lb Maximum weight supported by work surface P31 Right Frame 3000007383 Hardware list F2 F3 F8 F4 F9 1000009499 1000008391 1000008387 1000008299 1000008368 Qty. 3 Qty. 20 Qty. 20 Qty. 4 F13 F16 F17 1000009033 3000007407 1000008285 Qty. 1 Qty. 1 Qty. 4 Qty.
STEP 1 1.Fit the shoes to frame P32 and P31 base and turn to screw. To level the height or the table, turn the shoe clockwise or counterclockwise until is aligned F9 4x P31 P32 STEP 2 1.
STEP 3 1.Align frames P31 and P32 to P34 2.Fix corner brackets F16 to the metallic part of P34, with F3 and F8 F3 8x F8 P32 8x F16 P34 STEP 4 P31 1.
STEP 5 1.Align the part P29 to frames P31 and P32 2.Fix part P29 to frames P31 and P32 with F3 and F8 F3 4x P32 F8 4x P34 P31 P29 STEP 6 1.
STEP 7 1 -Insert product log F17 1x
1000008414 -15/03/2018 ASSEMBLY HANDBOOK FORTRESS 31.5" MOBILE GARAGE CABINET WITH SHELVESS 3GMCF Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.com View our assembly video online www.manhattancomfort.
In order to ease the assembly, you should separate and identify the parts first Necessary hardware for the assembly * Included in the kit Do not place the parts directly onto the floor. Use a cardboard sheet or a mat to place the parts, during the separation and assembly. Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.com View our assembly video online www.manhattancomfort.com IMPORTANT In order to avoid severe or even fatal injuries, follow the instructions carefully.
ASSEMBLY HANDBOOK - FORTRESS 31.5" MOBILE GARAGE CABINET WITH SHELVES P10 Upper Back 3000007312 P3 Left Side 3000007316 WARNING P5 Top 3000007270 P19 Shelf 3000007311 55l b 55l Maximum weight supported by shelf b P9 Lower Back 3000007366 55l b 55l b P7 Bottom 3000007271 P22 Left Door 3000007302 P2 Right Side 3000007308 P23 Right Door 3000007304 Hardware list F1 F7 F15 F13 F17 1000009500 1000008301 1000008280 1000009033 1000008285 Qty. 16 Qty. 1 Qty. 4 Qty.
STEP 1 1 - Fit part P7 inside part P3 2 - Fit both parts in the frontal side, with F1 F1 2x P3 P7 STEP 2 F1 1 - Fit part P2 inside part P7 2 - Fit both parts in the frontal side, with F1 2x P3 P7 P2
STEP 3 F1 1 1 - Fit part P5 between part P2 and P3 2 - Check that all 4 tabs have been fitted 3 - Fit part P5 to parts P2 and P3, at the frontal side, with F1 4x 2 P5 P3 P7 3 P2 STEP 4 F1 1 - Turn the cabinet with the back side upwards 2 - Fit parts P2 and P3 to parts P5 and P7 with F1 8x 180° P2 P7 P2 P5 P5 P3 180° P7 P3
STEP 5 1 - Fit part P10 into parts P2, P3 and P5 Check that all fits are supported over the bolts 2 - After fitting the parts, screw the bolts until locked WARNING 1 P2 2 STEP 6 Position part P10 on the P5 side for mounting the P10 P5 P3 P7 1 - Fit part P9 into parts P2, P3 and P7 Check that all fits are supported over the bolts 2 - After fitting the parts, screw the bolts until locked 1 P9 P2 2 P7 P10 P3
STEP 7 1 - To assembly the cabinet with shoe fit the accessory F9 in part P7 as illustrated here below and turn to screw. To level the height or the cabinet, turn the shoe either clockwise or counterclockwise to align it.
STEP 9 F7 1 - Fit the lower part P19 in diagonal position to insert it inside the cupboard 2 - Lean part P19 in part P2, P3 and place it over the F7 detailed in the figure here below 3 - Lower the other side of part P19, leaning it over the left F7 P5 P3 P19 P2 P7 STEP 10 1 - To assembly the doors, fit door P23 lower hinge bolt inside the bushing fixed in part P7 Then, pull down the pin of door P23 upper hinge; align the door and release the pin to fit the bushing fixed in part P5 2 - Repeat the step
1000008415 - 15/03/2018 ASSEMBLY HANDBOOK – FORTRESS 31.5" MOBILE GARAGE CABINET WITH DRAWER AND SHELVES 2GMCF Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.com View our assembly video online www.manhattancomfort.
In order to ease the assembly, you should separate and identify the parts first Necessary hardware for the assembly * Included in the kit Do not place the parts directly onto the floor. Use a cardboard sheet or a mat to place the parts, during the separation and assembly. Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.com View our assembly video online www.manhattancomfort.com IMPORTANT In order to avoid severe or even fatal injuries, follow the instructions carefully.
ASSEMBLY HANDBOOK – FORTRESS 31.
STEP 1 1 - Fit part P7 inside part P3 2 - Fit both parts in the frontal side, with F1 F1 2x P3 P7 STEP 2 1 - Fit part P2 inside part P7 2 - Fit both parts in the frontal side, with F1 F1 2x P3 P7 P2
STEP 3 F1 1 - Fit part P5 between part P2 and P3 2 - Check that all 4 tabs have been fitted 3 - Fit part P5 to parts P2 and P3, at the frontal side, with F1 1 4x 2 P5 P3 P7 3 P2 STEP 4 F1 1 - Turn the cabinet with the back side upwards 2 - Fit parts P2 and P3 to parts P5 and P7 with F1 8x 180° P2 P7 P2 P5 P5 P3 180° P7 P3
STEP 5 1 - Fit part P10 into parts P2, P3 and P5 Check that all fits are supported over the bolts 2 - After fitting the parts, screw the bolts until locked 1 P2 2 STEP 6 WARNING P10 Position part P10 on the P5 side for mounting the cabinet.
STEP 7 1 - To assembly the cabinet with shoe fit the accessory F9 in part P7 as illustrated here below and turn to screw. To level the height or the cabinet, turn the shoe either clockwise or counterclockwise to align it.
STEP 9 F7 1 - Fit the lower part P19 in diagonal position to insert it inside the cupboard 2 - Lean part P19 in part P2, P3 and place it over the F7 detailed in the figure here below 3 - Lower the other side of part P19, leaning it over the left F7 P5 P3 P19 P2 P7 STEP 10 F1 1 - Insert part P17 inside the cabinet, in diagonal position.
STEP 11 1 - To assembly the doors, fit door P26 lower hinge bolt inside the bushing fixed in part P7 2 - Then, pull down the pin of door P26 upper hinge; align the door and release the pin to fit the bushing fixed in part P17 3 - Repeat the step for part P27 1º P5 P2 P19 P17 P26 P3 P7 P27 STEP 12 1 - Fit part P15 to part P28 2 - Fit them with F1 F1 3x P15 P28 2º
STEP 13 1 - Align parts P12 and P13 to part P15, until it leans against part P28 2 - Fit them with F1 F1 4x P13 P12 P15 P28 STEP 14 F1 1 - Insert part P14 over part P15 and between parts P12 and P13 2 - Then, fix part P14 to parts P12, P13 and P15, with F1 5x P14 P13 P15 P28 P12
STEP 14 1 - Fit the drawers – already assembled – between parts P2 and P3, through the slidings 2 - Check that slidings of both sides are properly fitted.