Instructions / Assembly

Step 11
DR002
Page 16
◆
To insert the DRAWER into your unit, line up the EXTENSION SLIDES on the drawer with the
EXTENSION RAILS on the unit and push the drawer into the unit.
Before the drawer is fully inserted, please make sure the interlock pins on
the EXTENSION SLIDES on the drawer is pushed forward as shown on the diagram.
The drawer should push in hard until it is all the way in , then it will slide in and out easier.
Attention: This unit used Drawer Interlocking System, when one drawer is open,
the other drawers cannot be opened.
On the Left EXTENSION SLIDES,
please make sure the small pin is upward.
On the Right EXTENSION SLIDES,
please make sure the small pin is downward.