INCLUDED IH THE PACKAGE REAR EW HIRE © 5 Lower Crossbar Left Side Panel Rear Bar Top Panel Front of the drawer Rear Panel of the drawer Shelf Wood Feet 4 Te Slide 300mm 1 PRAM HAT TAN 2 COMFORT
[sleeve 1 « Apply glue (8B) to the upper end of the feet (15) and fix them to the Crossbars (01) with bot (A), positioning them so that the Inclination of the feet faces the lateral ends of the bar. * Apply the protective felt (C) on bottom of the feet (15). [sere 2 © With the Feet (15) already fixed to the Crossbars (01), position them on the underside of the Base (02), observing the front edge of the parts (edge with finish).
[sre 4 I » Connect the the Side Peels (03) and (04) on the Base (02) with dowels (E) and bolts 5.0 x 50mm (F). » Connect the Top Panel (07) on the Side Panels (03) and (04) with dowels (E) and Mini fix hardware Fix the hinge connectors (N) In the Side Panels (03) and (04) with bolts 3.5 x 14mm (M). * Apply the supports (J) in the Side Panels (03) and (04), for later installation of the Shelves (13).
STEP & Preparing the drawer: + Fix the handles (P) in Front of the drawer (09) with bolts 3.5 x 25mm (0). Connect parts (09), (10) and (11) with dowels (E) and Mini fix hardware shown in DETAIL 2. + Apply adhesive covers (I) on the mini fix hardware (H). + Place the Base (12) into the channel in the Front (09), tv align the edges with the Side panes (10) and apply bolts 3,5 x 16mm (L) to fix it.
[sere gs Preparing the Doors (14): » Fix the handle (F) at Doors (14) with bolt (0), forming a doors pair (deft door and right door). » Fix the hinges (N) on the Doors (14) with bolts 3.5 x 14mm (M), as shown In the DETAIL 3. [seep 0 Installing the Doors (14): « Insert the hinges from the doors (14) onto the connector already fixed on the Side Panels (03) and (04). The connector includes two bolts, shown in DETAIL 4. Use the fixer and adjustment bolts on the insert to tighten, adjust and align the door.
