Floating Cubet Cabinet Manual

01
21
TAKING GOOD CARE OF YOUR CABINET
Cleaning and caring instructions:
- Avoid dragging objects on top of the cabinet. They might scratch the finishing.
- Only non-abrasive natural chemical products are recommended to clean your cabinet.
Simply wipe the cabinet down with a wet cloth to remove the cleaning product excess.
- Never clean the cabinet with scouring powders, steel scrubber pads or any other product
which can scratch its surface.
- Chemical products are not recommended.
- Cabinet surfaces should not be covered with colored plastic or paper sheets.
- Acid substances like salt, onion, ketchup and mustard must remain properly stored in
sealed containers.
- Avoid the direct contact of water with other surfaces than the sink, as the humidity can
affect the durability of the cabinets.
- Avoid cabinets exposure to direct Sun light. Drapers suggested.
- For technical assistance outside Brazil, please, contact the store where you purchased
your product.
- This guidance should be saved for future reference, if necessary.
BEWARE: Do not use a damp cloth to clean the cabinet. Excessive moisture can damage
its surface.
IMPORTANT: REMOVE THE RIBBON TO FINISH THE ASSEMBLY
F9
1X
P6
1 - Glue F8 to part P6 in the indicated area.
F9
ATTENTION
To avoid serious or irreparable damage to the product, follow the instructions carefully.