[sleeve 1 . « Fix the feet (18) under the Base (01) with bolts 5.5 x 65mm (A). « Apply the protective felt (C) at the lower end of the feet (18). « Apply the plastic cover (8) on top of the bolts (A). + Connect the Side Panels (02) and (03) and the Partitions (04) and (05) onto the Base (01) with dowels (D) and bolts (E).
[sere 4 « Line the floor with the cardboard and the foam mantle of the packing to protect the parts and arrange the Lower Panel (09), Middle Pane (10) and Upper Panel (11) with the rear face upwards, checking correctly the position of each part according to the floes and the drawing. » Join the Canals (09), (10) and (11), correctly aligning its edges and connect them with the steel plates (7) and bolts (L) and with the Middle Rear Bars (12) and bolts 5.0 x 25mm (1).
[sere s * Fix the Rear Columns (08) in the Side Panels (02) and (03), applying the steel pistes (3) with bolts (L), as shown In drawing. » Fix the Lower Rear Bar (14) on the Partitions (04) and (05) with bolts and in the Columns (0B) with metal brackets (K) and bolts (L). [sere 7 « Fix the Back Pane! (15) with nails (M).
[sere gs Preparing the Doors (17): « Insert the plastic ring (Q) In the Doors (17). * Fix the hinges (N) on the Doors (17) with bolts 3.5 x 14mm (0), as shown In the DETAIL 3. [sere [= MANHATTAN COMFORT » Connect the Upper Sheaf (16) in the Upper Panel (11) with dowels (0) and bolts 5.0 x 50mm (E). » Insert the plastic parts (R) in the Middle and Upper Panels (10) and (11). » Install the Shelves (06) by supporting them on the supports (F) already applied in the Partitions (04) and (05).