INCLUDED IH THE PACKAGE Base Side Panel Lower.
[sleeve 1 « Fix the feet (21) under the Base (01) with bolts 5.5 x 65mm (A). « Apply the protective felt (C) at the lower end of the feet (21). « Apply the plastic cover (8) on top of the bolts (A). » Connect the Lower Right Partition (05) under the Lower Shelf (06) with dowels (D) and obit (E). + Context the Right Side Panel (03) and the Middle Partition (04) In the Lower Shelf (05) with dowels (D) and Mini fix system (F + G).
[sere 4 « Connect the Lower Panel (09) onto the Kiddie Shelf (08) with dowels (D) and bolts 5.0 x 50mm (E). « Connect the Middle Shelf (08) onto the Side Panels and Partitions (02), (03), (04) and (07) with dowels (D) and Mini fix system the end the fixing, apply the adhesive covers (H). « Fix the hinge connector (P) in the Left Side Panel (02) and in the Partition (04) with bolts 3.5 x 14mm (Q).
[sere 7 + Connect with dowels (D) the Columns (10) In the Lower Panel (05) already fixed in the Middle Shelf (08). » Connect the lower end of the Columns (10) onto the Base (01) -D and fix them with bolts (E). [sere se * Fix the Rear Columns (10) in the Side Panels (02) and (03), applying the steel plates (J) with bolts (L), as shown in drawing. « Fix the Rear Columns (10) In the Lower Panel (09) with metal brackets (K) and bolts (L).
[sere so =i = Fix the Back Panels (16), (17) and (18) with nails (N). A [ At the junction between Panels (16) g 0 d and (17), also use the plates (M). °F] Between the Panels (16) and (18), fit the Plastic Profile (22). a 66 [free 10 Preparing the Doors (20): « Insert the plastic ring (5) in the Doors (20). » Fix the hinges (P) on the Doors (20) with bolts 3.5 x 14mm (Q), as shown in the DETAIL 5.
[ayes 11 « Connect the Upper Shelf (15) In the Upper Panel (12) with dowels (D) and bolts 5.0.x 50mm (E). » Insert the plastic parts (T) In the Panels (11) and (12). « Fix the supports for glass (0) In the Panel (11) with bolts (Q), insert the Glass Shelf (23) and tighten the fixer bolt of each support, as shown In the DETAIL 6. Installing the Doors: Insert the hinges from the Doors (20) onto the connector already fixed on the Left Side Panel (02) and on the Middle Partition (04).