For Best Results Bo nok throw away packaging materials until assembly Is complete, Assemble item on a soft surface, such as cardboard or carpet, to protect finish. Proper assembly requires two people.
Included in this Package 01 LOWER TOP RIGHTSIZE x1 is Maximum 03 LOWER LEFT SIDE x 04 CENTRAL TOP x1 supported. 05 RIGHT SIDE OF THE CELLAR x 06 SHELF OF THE CELLAR x5 07 CELLAR LEFT SIDE x1 08 SHELF x2 09 UPPER LEFT SIDE x1 10 UPPER TOP x1 1 MOBILE SHELF x1 12 LOWER BACK x2 13 UPPER BACK x3 14 CELLAR BACK x1 15 LOWER DOOR x2 16 DOOR WITH MIRROR x1 17 NARROW UPPER DOOR x1 18 FITTINGS x1 18 Fittings D21MM SCREW .
Prepare the pieces Step 1 Insert the wooden dowels (G} into parts and 09. Remember to use the glue (U). G 6X30MM WOODEN : |) WHITE GLUE Ha Step 2 Insert screw (B} into part 02, 04, 07 and 09. Tighten to the limit.
Prepare the pieces Step 3 Fix the hinges (S) on the marks on the doors 15, 16 and 17 using sixteen screw {T) we SCREW : :S 26MM FRAME WING x16 xB Step 4 Fix the door wing (R) on the marks on the 02, 03 and 07, using the screw (T).
Assembly Step 5 Put the parts 01 and 02 together and use two screws (E) and the Allen wrench {F). F-ALLEN WRENCH x1 [immvvyyyavsnne E 7X50 SCREW x2 Step 6 Put the parts 01 and 03 together and use two screws (E) and the Allen wrench (F). — FALLEN WRENCH 7X50 SCREW 13 Step 7 Put the glue (U) in the wooden dowel (G) already fixed into parts 03. Then put parts together with part 04. Insert the four mini fix connectors (C) in part 03 and 04 and rotate clockwise as shown. Tighten to the limit.
Assembly Step 8 Put the glue {U) in the wooden dowel (G) already fixed into parts 06. Then put the parts 06 together with part 05. Turn the part and use the five screws {L) to fix the pieces. WHITE GLUE x1 Turn the part 05 to fix the screws in the other side L5X40MM SCREW FALLEN WRENCH x5 x1 Step 9 Put the part 05 together in the part 02 and Insert four screw (K} through parts 05 according to the drawing.
Assembly Step 11 Put the glue (U) in the wooden dowel (F) already fixed into part 08, then insert the parts 08 together in the part 07. Use four mini fix connector (C} in parts 08 and rotate clockwise as shown. Tighten to the limit. Tighten the mini fix up to the limit to assembly don’t be slack. 2 C15MM CONNECTOR x4 Step 12 Put the glue (U) in the wooden dowel (F) already fixed Into part 08.
Assembly Step 14 Put the part 10 together in the parts 02, 07 ~ and 09, and use six screw (E) with the Allen wrench {F). — FALLEN WRENCH x [imam vacancy E 7X50 SCREW x6 Step 15 Insert the screw (H) through parts 02 and 03 according to the drawing using the Allen wrench (F). The screw {H) must fix parts 02 and 03 on the feet (M). — F ALLEN WRENCH x1 moan H 1/4X25MM SCREW x4 Step 16 Fix the backs 12, 13, and 14 using the balls {0} and fixer for back wardrobe {P).
Assembly Step 17 insert four shelf support (V) In parts 02 and 03.
Assembly Step 19 Insert the frame wing (S} in the door wing {R) for fix the door (16) in part 07. Then Insert a frame wing (S) in the door wing {Q) for fix the door (17) in the part 09. When It Is ok, Insert the screw (J) from Inside the door, tighten Into the handle {A) on the outside.
Safe and Security KIT FOR DRYWALL ow -prewar Go to Step 14 (— DWI-x1 DOWSE -x1 KIT FOR MASONRY mw = Masonry wall Goth Step 18 Bette CI=A©) MW1 -x4 MW2 -x4 MW3 -x4 MW4 -x4 MEWS -x2 WARNING Serious or fatal crushing injuries can occur from furniture tip-over, ALWAYS secure this furniture to the wall using tip-over restraints. To further reduce the risk of serious injury and death from tip-overs: Place heaviest items in the lower drawer. Do not set TVs or other heavy objects on the top of this product.
Safe and Security KIT FOR DRYWALL 1. Make holes on the wall following the model below and specifications: Step 21 & 14mm drill. ¥ Depth of 60mm Use an electric drill. 8. Put the corner {(DW4) on the upper top (10) of the product.
Safe and Security S. Put the Dressing Table to the wall and aligning the hole In the safety block with the hole that was made the drywall. Done so, insert the screw up to its maximum limit on. Step 23 10.
KIT FOR MASONRY 1. Make holes on the wall following the model below and specifications: Step 25 i 8mm drill. ¥ Depth of 50mm A Use an electric drill. 2. Insert the bushing into the hole made on the wall, 3. Put the screws into the bushings, but don’t tighten until Step 27 the end. it’s necessary 0.33" {10mm} deft to ft on the lock.
4, Put the locked on the horizontal as the pictures below, A Check the distance between wall's holes. i must be the same distance between centers of dressers device, 5. Drag the product carefully until you meet the screw’s head. Fit the screw into the locker as the picture below. A Put the two pieces together and insert the seal.
TAKING GOOD CARE OF YOUR FURNITURE Cleaning and caring instructions: Wipe the wood furniture down with a moist cloth to properly clean the furniture. Do not forget to dry your furniture out. Humidity can damage the finish or create mold. Chemical products are not recommended; Never clean the furniture with scouring powders, steel scrubber pads or any other product which can scratch its Furniture surfaces should not be covered with colored plastic or paper sheets.