000008414 -15/03/2018 ASSEMBLY HANDBOOK FORTRESS 31.5" MOBILE GARAGE CABINET WITH SHELVESS 3GMCF Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.com View our assembly video online www.manhattancomfort.
In order to ease the assembly, you should separate and identify the parts first Necessary hardware for the assembly * Included in the kit Do not place the parts directly onto the floor. Use a cardboard sheet or a mat to place the parts, during the separation and assembly. Stuck? Questions? We are here to help. 1-888-230-2225 help@manhattancomfort.com View our assembly video online www.manhattancomfort.com IMPORTANT In order to avoid severe or even fatal injuries, follow the instructions carefully.
ASSEMBLY HANDBOOK - FORTRESS 31.5" MOBILE GARAGE CABINET WITH SHELVES P10 Upper Back 3000007312 P3 Left Side 3000007316 WARNING P5 Top 3000007270 P19 Shelf 3000007311 55l b 55l Maximum weight supported by shelf b P9 Lower Back 3000007366 55l b 55l b P7 Bottom 3000007271 P22 Left Door 3000007302 P2 Right Side 3000007308 P23 Right Door 3000007304 Hardware list F1 F7 F15 F13 F17 1000009500 1000008301 1000008280 1000009033 1000008285 Qty. 16 Qty. 1 Qty. 4 Qty.
STEP 1 1 - Fit part P7 inside part P3 2 - Fit both parts in the frontal side, with F1 F1 2x P3 P7 STEP 2 F1 1 - Fit part P2 inside part P7 2 - Fit both parts in the frontal side, with F1 2x P3 P7 P2
STEP 3 F1 1 1 - Fit part P5 between part P2 and P3 2 - Check that all 4 tabs have been fitted 3 - Fit part P5 to parts P2 and P3, at the frontal side, with F1 4x 2 P5 P3 P7 3 P2 STEP 4 F1 1 - Turn the cabinet with the back side upwards 2 - Fit parts P2 and P3 to parts P5 and P7 with F1 8x 180° P2 P7 P2 P5 P5 P3 180° P7 P3
STEP 5 1 - Fit part P10 into parts P2, P3 and P5 Check that all fits are supported over the bolts 2 - After fitting the parts, screw the bolts until locked WARNING 1 P2 2 STEP 6 Position part P10 on the P5 side for mounting the P10 P5 P3 P7 1 - Fit part P9 into parts P2, P3 and P7 Check that all fits are supported over the bolts 2 - After fitting the parts, screw the bolts until locked 1 P9 P2 2 P7 P10 P3
STEP 7 1 - To assembly the cabinet with shoe fit the accessory F9 in part P7 as illustrated here below and turn to screw. To level the height or the cabinet, turn the shoe either clockwise or counterclockwise to align it.
STEP 9 F7 1 - Fit the lower part P19 in diagonal position to insert it inside the cupboard 2 - Lean part P19 in part P2, P3 and place it over the F7 detailed in the figure here below 3 - Lower the other side of part P19, leaning it over the left F7 P5 P3 P19 P2 P7 STEP 10 1 - To assembly the doors, fit door P23 lower hinge bolt inside the bushing fixed in part P7 Then, pull down the pin of door P23 upper hinge; align the door and release the pin to fit the bushing fixed in part P5 2 - Repeat the step