User Guide

Creating Mirrored Sets (RAID 1)

1. As the BIOS boots, press CTRL+S or F4 to enter the rAID BIOS utility.

2. Select "Create RAID set." Press Enter.

3. Select "RAID 1," then press Enter.

4. Select "Auto conﬁguration." Press Enter.

5. Press Y to save your settings.

6. Press CTRL+E and then press Y to exit the setup.

7. Continue with conventional Fdisk and Format steps as if installing a conventional hard drive.

8. Your RAID conﬁguration is complete. Proceed to Software Installation.

Creating a Mirrored-Striped Set (RAID 10)

1. As the BIOS boots, press CTRL+S or F4 to enter the RAID BIOS utility.

2. Select "Create RAID set." Press F2.

3. Select "RAID 10," then press Enter.

4. Select "Auto conﬁguration." Press Enter.

5. Press Y and then press ESC to exit the setup.

7. Continue with conventional Fdisk and Format steps as if installing a conventional hard drive.

8. Your RAID conﬁguration is complete. Proceed to Software Installation.