Hi-Speed USB 2.
Thank you for purchasing the MANHATTAN® Hi-Speed USB 2.0 SVGA Converter, Model 179119. Designed to help increase productivity, improve desktop arrangements and extend the visual work area across dual monitors, this device makes word processing, editing and multi-tasking more effective with less-overlapped windows, fewer hidden palettes and better-organized views. Users can read e-mail on one monitor and open attachments on the other.
CE This equipment is in compliance with the requirements of the following regulations: EN 55022 Class B (2006); EN 55024 (1998+A1:2001+ A2:2003), (IEC/EN 61000-4-2 [1995+A1:1998+A2:2001)/-3(2006]). C-Tick This equipment is in compliance with the requirements of the following regulations: EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005. VCCI This equipment is in compliance with the requirements of the following regulations: CISPR22 © IEC: 2005.
3. When the License Agreement screen displays, read it and select “I accept the terms of the license agreement.” Click “Next” to continue. 4. When the InstallShield Wizard Complete screen displays, select “Yes, I want to restart my computer now.” Click “Finish” to complete the driver installation. 5. Connect the external display device (monitor/projector) to the VGA (DB15) connector of the Hi-Speed USB 2.0 SVGA Converter and switch it on. 6.
Driver Un-Install (2000/XP) 1. On the desktop, go to Start → Settings (Classic start menu) → Control Panel → Add or Remove Programs. 2. Select “USB 2.0 Graphics Card (Trigger) (driver version number)” and click “Remove.
3. Disconnect the HiSpeed USB 2.0 SVGA Converter and click “OK” to continue. 4. Select “Yes, I want to restart my computer now” and click “Finish” to reboot. After rebooting, the driver un-install procedure will be complete. Windows Vista 1. Insert the enclosed driver CD into the CD-ROM drive. The setup program should be launched automatically; if not, go to Start, then Run, and then double-click “D:\Setup.exe” (where D: is the path of your CD-ROM drive). 2.
3. When the License Agreement screen displays, read it and select “I accept the terms of the license agreement.” Click “Next” to continue. 4. The Hi-Speed USB 2.0 SVGA Converter is configuring your new software installation... ... and is searching for installed features. 5. Select “Yes, I want to restart my computer now” and click “Finish” to complete the driver installation.
6. After rebooting the computer, plug the Hi-Speed USB 2.0 SVGA Converter into an available USB 2.0 port on your PC or notebook. The extended display will be shown on the second display device. Verifying Driver Installation (Vista) On the desktop, right-click My Computer → Properties → Device Manager; then double-click “Display adapters” and “Universal Serial Bus controllers.” “Universal Serial Bus controllers” should feature: • “USB 2.0 Graphics Card” “Display adapters” should feature: • “USB 2.
Driver Un-Install (Vista) 1. On the desktop, go to Start → Control Panel → Programs and Features. 2. Select “USB 2.0 Graphics Card (Trigger) (driver version number)” and click “Uninstall.” 3. Disconnect the HiSpeed USB 2.0 SVGA Converter and click “OK” to continue. 4. Select “Yes, I want to restart my computer now” and click “Finish” to reboot. After rebooting, the driver un-install procedure will be complete. functions The Hi-Speed USB 2.0 SVGA Converter works with LCD or CRT monitors.
Clicking the UVT icon also provides access to the Resolution options, which can be changed here or by going to Display Properties/ Settings. NOTE: All Windows 2000/ XP/Vista resolution settings are formatted with a 4:3 aspect ratio except for 1280 x 1024, which is 5:4. (1024 x 768 is the best choice for viewing DVDs.) Win CE settings are also 4:3 except for 800 x 480, which is 15:9.
Hi-Speed USB 2.0 SVGA Converter will now act as the primary Windows desktop. NOTE: Some display utilities and drivers found with certain AGP and built-in display adapters may prevent this option from working on some systems. You can disable the other utility program (usually in the same toolbar located on the bottom-right corner of the desktop) to make this function work properly. Extended Mode By default, the monitor connected to the Hi-Speed USB 2.
faq Following are some frequently asked questions — and answers — regarding the installation or operation of the Hi-Speed USB 2.0 SVGA Converter. Q: Why can’t I make the Hi-Speed USB 2.0 SVGA Converter the primary display? A: Some video card manufacturers include a utility that prevents other video cards from being set as the primary card. Check the bottomright corner taskbar for the utility, and disable the utility before designating the Hi-Speed USB 2.0 SVGA Converter as the primary display.
operation tips Following are some tips that may help if you are experiencing any difficulties using the Hi-Speed USB 2.0 SVGA Converter. Contact your dealer for additional assistance, if needed. • • • • • • • • • • • • • Check to make sure that all connectors are plugged in correctly. Make sure that the USB port that you are using is USB 2.0. Try a different USB 2.0 port and/or computer. Check to see that the monitor is connected correctly and the power is on.
specifications Standards and Certifications • Hi-Speed USB 2.
MANHATTAN® offers a complete line of PC Components, Peripherals, Cables and Accessories. Ask your local computer dealer for more information or visit us online at www.manhattan-products.com Copyright © MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners.
