User's Manual
34
Appendix A – Safety
POWER
Your receiver requires a 100V to 240V AC ~ 50Hz mains supply 
and is fitted with a moulded plug. The mains plug is used as the 
disconnect device and shall remain readily operable. The USB port 
maximum load is 500mA under normal operation.
CABLES
Make sure all cables are positioned so they are not likely to be 
walked on, crushed or damaged by things placed on or against 
them. Pay particular attention to the power cable where it goes 
into the socket and where it comes out of the receiver. Do not 
connect or adjust cables to the receiver when it is plugged in.
TEMPERATURE AND MOISTURE 
Use the apparatus only in moderate climates (not in tropical 
climates). Do not allow it to get wet as this is dangerous. Do 
not expose the apparatus to dripping or splashing. Do not place 
objects filled with liquids, such as vases, on the apparatus.
HEAT AND FLAMES
Do not place the apparatus near to naked flames or sources of 
intense heat, such as an electric fire. Do not place naked flame 
sources, such as lighted candles on the apparatus. Batteries shall 
not be exposed to excessive heat such as sunshine, fire or the like.
VENTILATION
Slots and openings in the receiver’s cover are for ventilation. Ensure 
a minimum distance of 5cm around the apparatus for sufficient 
ventilation. Ensure the ventilation is not impeded by covering the 
ventilation opening with items such as newspapers, table-cloths, 
curtains, etc. Failure to follow these instructions could lead to the 
receiver overheating.
CLEANING
Unplug the receiver before you clean it with a lightly dampened 
cloth. Do not use liquid or aerosol cleaners.
LIGHTNING
If there is a storm or lightning, unplug the receiver.
SERVICING
Make sure that anyone who services your receiver is qualified to do 
so. Do not remove the cover yourself – you could get an electric shock.
REPLACEMENT PARTS
If your receiver needs repairing, make sure the person carrying out 
the repair uses parts which are specified by us or which have the 
same specifications as the original part. Other parts may cause a 
fire, electric shock or other dangers.










