Instructions


3. SendtheMonitor
SMPTEcolorbarstothemonitorfromyoureditsystem,signal
generator,camera,orvideosource.Theyshouldlooklikethis.Orsendcolorbarfrom
providedDVD.ColorPatterns‐‐‐ColorBars



4. UsingTheRemotehit9‐1‐1‐thenMENUtoenablePWx90factorymenu.
5. ScrollovertothePWx90usingthearrowsontheremotemenuandselect“YCbCrCalibration”
byhittingtheRightarrow>ontheremote.
(***NoteAfterFlashing,MonitormustbeturnoffoncebeforeCalibration***)
(***NoteDoNotChangePanelSelectorthemonitormaydisplayablankscreen***)
6. ThisiswhattheNTSCcolorbarswilllooklikeonacorrectlycalibratedmonitornotetheplunge
barintheblacksectiononthelowerrightisbarelyvisable.