Instruction Manual

Section:On Screen Display Functions

MANHATTAN LCD

HD8400

Quick Guide

Setup > Selection for the corresponding input sources detection

HD/SD SDI 1

• HD/SD SDI 2 • VGA • DVI • HD Component • Composite 1

Composite 2 • S-Video • SD Component

The corresponding input port name display on OSD menu will disappear once

setting “OFF”.

De-interlacing Mode*> AFM

: Auto Film Mode • TNR : Temporal Noise Reduction

MADI

: Motion Adaptive De-interlacing • LADI : Low Angled De-interlacing

Auto Power

: OFF / ON

ON – Enable soft power off function if absence of input signals

OFF – Disable soft power function

Video Standard (SD)* : Auto / NTSC / NTSC 4.43 / PAL / PAL M / SECAM

Image Orientation : Normal / Horizontal flip / Vertical flip / Rotate

Gamma : 1.0 / 1.6 / 2.2

OSD

OSD position :

H POS

: Move the OSD menu image horizontally

V POS

: Move the OSD menu image vertically

OSD Timeout (sec) : ON – 60 : Adjust the OSD menu timeout period in a step of 5

seconds (max 60 seconds)

ON = Continuous to display OSD menu.

60 = 60 seconds later will turn off the OSD menu.

Language : English / Chinese : Select OSD menu language display

Transparency :

ON / OFF : Set OSD transparency

Freeze : Freeze the image (use “+” button)

Zoom >

Zoom level :

: Enable the zoom in function on the image displayed.

Use “+” button to zoom in the image

Use “-“ button to decrease the zoomed image

Horizontal pan :

: Pan the image horizontally

Vertical pan :

: Pan the image vertically

Default : Restore to default values

Note : Freeze state will be cleared when you using zoom function.

Utilities (...continued)