SATA QUICK CLONE DOCK USER MANUAL MODEL 130226 MAN-130226-UM-0311-02
INTRODUCTION Thank you for purchasing the MANHATTAN SATA Quick Clone Dock, Model 130226. ® Using one-touch cloning, this handy device easily replicates a SATA hard-disk drive while attached (software required) or unattached to a host PC. The easy-touse clone feature helps make upgrading to larger-capacity hard drives quick and simple. Dual insertion slots accept 3.5” and 2.
BASIC SETUP & OFFLINE (UNATTACHED) OPERATION Before using the SATA Quick Clone Dock, note the following features and requirements to ensure smooth and successful operation. • Bay A is where you insert the source (master) hard-disk drive (HDD) • Bay B is where you insert the target (slave) hard-disk drive • The capacity of the target HDD must be greater than that of the source HDD; otherwise, the cloning can not be properly completed. NOTE: Equal capacity is not adequate.
Top view: HDD bays 2. Insert the source HDD in Bay A and the target HDD n Bay B. NOTE: The capacity of the target (slave) HDD must be greater than the capacity of the source (master) HDD; otherwise, the cloning can not be properly completed. 3. When the A and B LEDs light, toggle the Power switch (on the rear panel) to On. 4. Press the Clone button for 3 seconds. When the LED lights, press the Clone button again. The LEDs will light to indicate progress (25%, 50%, 75% and100%).
ONLINE (ATTACHED) OPERATION The included software needs to be installed in order to operate the SATA Quick Clone Dock in conjunction with your computer. Before you begin, write down the serial number (printed on the software CD label or sleeve), as you’ll need to enter it in Step 5 below. 1. Use the included power adapter to connect the DC Input jack of the Dock to an AC power outlet. 2. Use the included USB cable to connect the Dock to the computer. 3.
5. On the second screen, enter the serial number as it appears on the label of the software CD. Click “Install” to continue. 6. A status screen will display to indicate the progress of the application installation. Click “Done” when the process is complete.
. Insert the source HDD in Bay A and the target HDD in Bay B. NOTE: The capacity of the target (slave) HDD must be greater than the capacity of the source (master) HDD; otherwise, the cloning can not be properly completed. 8. When the A and B LEDs light, toggle the Power switch (on the rear panel) to On. 9. When the clone icon appears in your system tray, double-click it to start the program. 10. When the initial clone activation screen displays, click “Start.” 11.
12. A status screen will display to indicate progress of the operation. Click “OK” when the status bar reads 100% and the operation is complete. 13. The next screen should indicate that the contents of the target HDD are now the same as the source HDD. (Note the Unused space on the target HDD.
14. If the target HDD has extra space, the system will automatically allocate it to an unallocated area, as shown below. NOTE: Windows allows a maximum of only four primary partitions. If the original disk already has four primary partitions, then it can not distinguish the extra space.
SPECIFICATIONS Standards and Certifications • Compliant with USB 3.0 and SATA Revision 2.6 • CE • RoHS • WEEE General • Connections: external, DC power input, USB 3.0 Micro-B; internal, (2) SATA data and power • Dual insertion slots fits 2.5” and 3.5” SATA HDD • Power and activity LED indicators with power buttonn Transfer Rate • SuperSpeed USB up to 5 Gbps and SATA up to 3 Gbps Physical • Power adapter: 241.3 cm (95 in.) • SuperSpeed USB cable: Standard A to micro B, 1.2 m (4 ft.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT Disposal of Electric and Electronic Equipment (applicable in the European Union and other European countries with separate collection systems) ENGLISH This symbol on the product or its packaging indicates that this product shall not be treated as household waste. Instead, it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
ITALIANO Questo simbolo sui prodotto o sulla relativa confezione indica che il prodotto non va trattato come un rifiuto domestico. In ottemperanza alla Direttiva UE 2002/96/EC sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE), questa prodotto elettrico non deve essere smaltito come rifiuto municipale misto. Si prega di smaltire il prodotto riportandolo al punto vendita o al punto di raccolta municipale locale per un opportuno riciclaggio.
WARRANTY INFORMATION ENGLISH: For warranty information, go to www.manhattan-products.com/warranty. DEUTSCH: Garantieinformationen finden Sie unter www.manhattan-products.com/warranty. ESPAÑOL: Si desea obtener información sobre la garantía, visite www.manhattan-products. com/warranty. FRANÇAIS: Pour consulter les informations sur la garantie, visitez www.manhattan-products. com/warranty. POLSKI: Informacje dotyczące gwarancji znajdują się na stronie www.manhattan-products. com/warranty.
R&TTE ENGLISH This device complies with the requirements of the R&TTE Directive 1999/5/EC. DEUTSCH Dieses Gerät enspricht der Direktive R&TTE Direktive 1999/5/EC. ESPAÑOL Este dispositivo cumple con los requerimientos de la Directiva R&TTE 1999/5/EC. FRANÇAIS Cet appareil satisfait aux exigences de la directive R&TTE 1999/5/CE. POLSKI Urządzenie spełnia wymagania dyrektywy R&TTE 1999/5/EC. ITALIANO Questo dispositivo è conforme alla Direttiva 1999/5/EC R&TTE.
MANHATTAN® offers a complete line of PC Components, Peripherals, Cables and Accessories. Ask your local computer dealer for more information or visit www.manhattan-products.com. All products mentioned are trademarks or registered trademarks of their respective owners. MANHATTAN® bietet ein vollständiges Sortiment an PC-Komponenten, Peripherie, Kabel und Zubehör. Weitere Informationen erhalten Sie von Ihrem Händler oder auf www.manhattan-products.com.
