Serial/Parallel Combo PCI Express Card USER MANUAL MODEL 160483 MAN-160483-UM-1106-04
Thank you for purchasing the MANHATTAN ® Serial/Parallel Combo PCI Express Card, Model 160483. Compliant with PCI Express 1.0a specifications, this card can be configured to achieve serial transfer rates of up to 115,200 bps and parallel data transfer rates of up to 1.5 MBps. hardware installatioN 1. Turn off the power to the computer system. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCIe slot. 4.
For Windows 2000 1. On the Found New Hardware Wizard screen, click "Next." 2. Select "Search for a suitable driver for my device (recommended)," and click "Next." 3. Check "Specify a location," uncheck the other boxes, then click "Next." 4. Insert the driver CD, enter "D:\PCIe\2S1P\2000" in the "Copy manufacturer’s files from" field, then click OK. (If needed, change "D:" to match your CD-ROM drive designation.) 5. Click "Next," then "Finish." 6. Restart Windows to complete the installation.
For Windows XP 1. On the Found New Hardware Wizard screen, select "Install from a list or specific location (Advanced)," then click "Next." 2. Insert the driver CD, check "Include this location in the search" and enter "D:\PCIe\2S1P\XP" in the blank field, uncheck the other box, then click "OK." (If needed, change "D:" to match your CD-ROM drive designation.) 3. If the Hardware Installation window pops up, click "Continue Anyway," then click "Finish.
For Windows Server 2003 1. On the Found New Hardware Wizard screen, select "Install from a list or specific location (Advanced)," then click "Next." 2. Insert the driver CD, check "Include this location in the search" and enter "D:\PCIe\2S\2003" in the blank field, uncheck the other box, then click "OK." (If needed, change "D:" to match your CD-ROM drive designation.) 3. If the Hardware Installation window pops up, click "Continue Anyway," then click "Finish.
Verifying Windows 2000/XP/Server 2003 Installation 1. Right click on "My Computer," then click "Manage." Click on "Device Manager." 2. Click on "+" in front of "Ports (COM & LPT)." Two "NetMos PCI Serial Port ..." and one "NetMos PCI ECP Parallel Port …" options should be displayed. 3. Double click on "Multifunction adapters." "NetMos 9835 PCI Multi-I/O Controller" should be displayed. Changing the COM Port Address Some serial devices need a specific COM port in order to work.
Changing the Parallel Port Address Some parallel devices need a specific parallel port in order to work. If your device works properly, don’t change this setting. Otherwise, follow these steps for Windows 2000/XP/Server 2003. 1. From the Device Manager window, double-click "Ports (COM & LPT)," then double-click on "NetMos PCI ECP Parallel Port..." 2. Click on the Port Settings tab. 3. At the "LPT Port Number" box, click the down arrow and select an LPT port that is not in use. 4.
www.manhattan-products.com Are you completely satisfied with this product? Please contact your MANHATTAN dealer with comments or questions. ® Copyright © MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners.