User manual

setup

1. Carefully unpack the speakers and accessories. Do not lift or

remove the speakers from the box by the function knobs or other

attachments as this may damage the speaker unit.

2. Place the satellite speakers and subwoofer in the

desired listening location. (See the conﬁguration

example in Suggestions for Setup & Operation.)

3. Attach the satellite speakers to the corresponding

output jacks on the rear panel of the subwoofer

unit: FR for front-right; FL for front-left; RR for rear-right;

RL for rear-left; CEN for center.

4. Using the included RCA cable, connect the input

jacks on the rear panel of the subwoofer unit to the

corresponding line out or audio output jack(s) of the

audio source (stereo tuner, computer, game system

or whatever). NOTE: Connect to the headphone

jack of the source if it’s the only output available.

5. Plug the AC power cord (attached to the rear of the

subwoofer unit) into an electrical outlet and set the

Subwoofer

Right/left,

front/rear

satellite

speaker

POWER AC

POWER

Center

speaker