User manual

• UP/DOWN — Volume is controlled with the UP and DOWN buttons,

with the corresponding LEDs ﬂashing during volume adjustment. If the UP

or DOWN LED doesn’t ﬂash while its volume button is pressed, the level

is at maximum. NOTE: To adjust the volume of individual and pairs of

speakers, use the UP and DOWN buttons in conjunction with the MODE

button (see below).

• STEREO/5.1 CH — Based on the current audio source, press the STEREO

button (CD mode) or the 5.1 CH button (DVD mode) to match the speakers’

output to the system’s input. In the CD mode, the 5.1 CH/STEREO LED

lights red; in the DVD mode (which is also the default), it lights blue.

• MODE — Separate volume control for the subwoofer and the front, rear

and central speakers is available through the use of the MODE button.

Press it once and the SUB LED lights to indicate that the volume of the

subwoofer can now be raised or lowered using the UP and DOWN

buttons. Pressing the MODE button again allows you to cycle through the

CEN, REAR and FRONT LEDs, each corresponding to volume control of

those individual or pairs of speakers when lighted.

• MUTE — Press the MUTE button to interrupt/pause the audio output from

the speakers, indicated by the ST_BY LED ﬂashing red. Press the MUTE

button again to resume audio.

POWER

DOWN

MODE

STEREO

5.1 CH

MUTE

5.1 CH/STEREO

ST_BY

FRONT

REAR

CEN

SUB

UP_LED

DW_LED