User manual

fM seTuP
You can use the FM application
to listen to FM radio and
recorditasWMA,MP3
andWAVlestobe
stored on your hard drive.
Click on the “Radio”
button(seePage7)to
display the FM interface
controlpanel(shownat
right),whichdepictsthe
options and functions.
Click on the “Setup menu” button to select and adjust settings.
FM Channel Edit
The controls on this screen allow the station menu list to be modified.
Torenameachannel:Click/highlightthechannelinthemenuwindow;right-
 clickandenterthenewname;clickthe“Update”buttontoapplythechange.
Tochangethepositionofachannelwithinthemenulist:Click/highlightthe
channel and click on the “Up” or “Down” buttons to re-position it.
Todeleteachannel:Click/highlightthechannelandclickthe“Delete”button.
To insert a channel: Click on the “Insert” button to display
the “Insert Channel” window. Enter a channel name
and frequency, then click “OK” to add the channel to
the menu.
Tonetuneachannel:Click/highlightthechannel;
 movetheslidercontroltotheoptimalposition;click
on “Update” to apply. NOTE:Ifthenew/adjustedpositionisnotgood,the
channel will revert to the default setting. Normally, the program locks on the
best frequency so that fine tuning is not necessary.
To automatically scan all channels available in your area: Click on the “Auto-
scan” button. The program automatically selects and sorts usable broadcast
 stations,whichcanthenbeeditedandprioritized.Clickonthesamebutton
to stop scanning.
14
OPERATION
1. Exit FM
2. Minimize
3. FM copyright info
4. Volume indicator
5. Record
6. Mute
7. Auto-scan
8. Setup menu
9. SwitchtoTV
10. Numeric channel
keys
11. Return to previous
channel
12. Open recorded file
13. Recorded file
  controls(lefttoright):
  Play;Pause/Stop;
  Stop/Playnext
14. Status windows
15. Channel up
16. Channel down