Install guide

4
HARDWARE CONNECTIONS
Matching the cables to the connections:
• Connect the portable (digital) antenna to the stick;
• Connect the stick to a USB 2.0 port on the computer (using the included
USB extender cable is necessary)
NOTE: When switching to analog reception, replace the included portable
antenna with an analog antenna, as the portable antenna can’t receive analog
signals.
SOFTWARE INSTALLATION
Driver
With the computer on and connected to the Hi-Speed USB 2.0 ATSC Hybrid Stick
through one of the computer’s USB ports, insert the included driver/software CD
in the CD-ROM drive.
1. Windows will automatically search for new hardware. When “USB ATSC
Hybrid” is found and recognized by the system, the initial startup screen will
display. Click “Cancel” to continue.
2. On the subsequent screen, select “Software Install” to contine with the driver
installation.
3. With the Install screen displayed, click “Next.”
4. Click “Install” on the next screen.
5. When prompted to install devices, click “Continue Anyway.”
6. When the Completed Installation screen displays, click “Finish” to complete
the driver installation.
TotalMedia
With the driver installation completed, select to install the TotalMedia software.
1. On the initial screen, choose the setup language, then click “Next” to continue.
2. On the next screen, click “Yes.” Arcsoft TotalMedia will begin installing.
3. To change the destination folder, click “Browse,” then click “Next.” NOTE: The
“recommended” option is your best choice.
4. On the next screen, click “Next.” The program will start copying les to your
computer.
5. When the Completed Installation screen displays, click “Finish” to complete
the TotalMedia installation.
IR Receive
With the TotalMedia installation completed, select to install the IR Receive
software.
1. On the initial screen, choose the setup language, then click “Next” to continue.
2. Click “Install” on the next screen.
3. When the Completed Installation screen displays, click “Finish” to complete
the IR Receive installation.
4. When prompted by the system, restart the computer.