User manual
2
Thank you for purchasing this MANHATTAN
®
HDMI Switch, Model 177368.
By being able to select among multiple high-denition sources sharing
a single display, you can keep devices connected and ready to use,
eliminating the need to swap cables and thus reducing the risk of high-
performance cable and port damage. Using this manual for reference,
you’ll soon be enjoying the benets of these features:
• Maintains highest single-link resolutions for clear, sharp images up to
2.5 Gbps, 1080p or VGA (1920 x 1200)
• Full-function infrared remote control, including an external receiver
that lets you “hide” the switch and cables from view
• Automatically detects and selects active source and routes to display
• Lifetime Warranty
Package Contents
• HDMI Switch with Remote Control
• External infrared receiver
OPERATION
1. Using HDMI cable no longer than 20 m (approx. 65 ft.), connect the
HDMI input sources (for example, a pair of HDMI DVDs, as shown
above) to the Input port(s) of the switch.
2. Using HDMI cable no longer than 15 m (approx. 50 ft.), connect your
HDMI viewing device to the Output port of the switch.
3. Select an input/signal source by pressing the button on the switch
that corresponds to the input port the desired device is connected to.
NOTE: This switch features an “intelligent” function: If a connected
input source is disconnected or turned off, the switch will automatically
select the connected and powered-on device that follows in the input
port sequence; for example, if the device connected to Input port 1 is
turned off or disconnected, the switch will select the device connected
to Input port 2. (Standby mode is read by the switch as still powered on.)
→
→
HDMI DVD
HDMI TV
HDMI swITcH
HDMI DVD
Input
Output