HI-SPEED USB 2.
Thank you for purchasing the Manhattan® Hi-Speed USB 2.0 SVGA Converter, Model 179225. Designed to help increase productivity, improve desktop arrangements and extend the visual work area across dual monitors, this device makes word processing, editing and multi-tasking more effective with less-overlapped windows, fewer hidden palettes and better-organized views. Users can read e-mail on one monitor and open attachments on the other.
CE This equipment is in compliance with the requirements of the following regulations: EN 55022 Class B (2006); EN 55024 (1998+A1:2001+ A2:2003), (IEC/EN 61000-4-2 [1995+A1:1998+A2:2001)/-3(2006]). C-Tick This equipment is in compliance with the requirements of the following regulations: EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005. VCCI This equipment is in compliance with the requirements of the following regulations: CISPR22 © IEC: 2005.
3. When the License Agreement screen displays, read it and select “I accept the terms of the license agreement.” Click “Next” to continue. 4. When the InstallShield Wizard Complete screen displays, select “Yes, I want to restart my computer now.” Click “Finish” to complete the driver installation. 5. Connect the external display device (monitor/projector) to the VGA (DB15) connector of the Hi-Speed USB 2.0 SVGA Converter and switch it on. 6.
7. When the Welcome to the Found New Hardware Wizard screen displays, select “no, not this time” and click “Next.” 8. On the subsequent screen, select “Install the software automatically (Recommended)” and click “Next.” 9. When the Completing the Found New Hardware Wizard screen displays, click “Finish” to complete the procedure. NOTE: To install additional converters using Windows 2000 or XP, plug each device into an available USB 2.0 port on the PC or notebook and repeat Steps 7 – 9.
With the installation of a single Hi-Speed USB 2.
With the installation of multiple Hi-Speed USB 2.
Driver Un-Install (2000/XP) 1. On the desktop, go to Start → Settings (Classic start menu only) → Control Panel → Add or Remove Programs. 2. Select “USB Display Device (Trigger 1+) (driver version number)” and click “Remove.” 3. Disconnect the Hi-Speed USB 2.0 SVGA Converter and click “OK” to continue. 4. Select “Yes, I want to restart my computer now” and click “Finish” to reboot. After rebooting, the driver un-install procedure will be complete.
Windows Vista /7/8 1. Insert the enclosed driver CD into the CD-ROM drive. The setup program should be launched automatically; if not, launch setup.exe from your CD drive manually. 2. When the InstallShield Wizard welcome screen displays, click “Next” to continue. 3. When the License Agreement screen displays, read it and select “I accept the terms of the license agreement.” Click “Next” to continue. 4. Setup is searching for installed features. 5.
NOTE: To install additional converters using Windows Vista, just plug each device into an available USB port on the PC or notebook. After rebooting, the extended display(s) will install and appear. Verifying Driver Installation (Vista/7/8) On the desktop, right-click My Computer → Properties → Device Manager; then double-click “Display adapters” and “Universal Serial Bus controllers.
With the installation of multiple Hi-Speed USB 2.0 SVGA Converters: Driver Un-Install (Vista/7/8) 1. On the desktop, go to Start → Control Panel .→ Programs and Features. 2. Select “USB Display Device (Trigger 1+) .(driver version number)” and click “Uninstall.
3. Disconnect the Hi-Speed USB 2.0 SVGA Converter and click “OK” to continue. 4. Select “Yes, I want to restart my computer now” and click “Finish” to reboot. After rebooting, the driver un-install procedure will be complete. FUNCTIONS The Hi-Speed USB 2.0 SVGA Converter works with LCD or CRT monitors. Click the USB Display Device icon to choose one of three modes: Primary, Extended and Mirror (plus an Off option).
Primary Mode The display device attached to the Hi-Speed USB 2.0 SVGA Converter acts as the primary display, while the display device attached to the computer now becomes the extended display. NOTE: Some display utilities and drivers found with certain AGP and built-in display adapters may prevent this option from working on some systems. You can disable the other utility program (usually in the same toolbar located on the bottom-right corner of the desktop) to make this function work properly.
Extended Mode By default, the monitor connected to the Hi-Speed USB 2.0 SVGA Converter will work as the “extended” desktop, which expands the primary Windows desktop of your system. You can change the relative position of this extended desktop in Display Properties/Settings. Mirror Mode In this mode, the Windows desktop will be replicated, or “mirrored,” to the secondary CRT/LCD monitor. The screen resolution setting on the secondary monitor will follow the primary screen’s resolution.
Multi-Display Control Panel The Hotkey List on the Multi-Display Control Panel screen allows you to move from one display to another — whether connected directly to the computer or through a Hi-Speed USB 2.0 SVGA Converter — more quickly and easily. The default hotkey settings, which are created as each display device is added to the system through a converter, are displayed on the Hotkey List. By pressing + <2>, for example, the window is moved to Display 2.
FAQ Following are some frequently asked questions — and answers — regarding the installation or operation of the Hi-Speed USB 2.0 SVGA Converter. Q: During driver installation for Windows 2000/XP, I’ve seen one or more warning messages referring to the driver or device not passing Windows logo testing.
A: This is due to a low refresh rate setting. You can change this by going to .Display Properties/Settings → Advanced Settings. NOTE: Make sure you select the USB 2.0 VGA device first and not set the refresh rate higher than what your monitor can support, as this can damage your monitor. You can also try to reset/refresh/resynchronize your monitor. Q: Why doesn’t Direct3D work? A: This is a current limitation of the Hi-Speed USB 2.0 SVGA Converter. Check for driver updates to add support for this.
SPECIFICATIONS General • Standards and Certifications: .Hi-Speed USB 2.
© IC Intracom. All rights reserved. Manhattan is a trademark of IC Intracom, registered in the U.S. and other countries.
