Cov lus qhia

Setup

1 Unlock unit door(s) and open them (NOTE: on front door, pull handle up from bottom and turn

counterclockwise).

2 To fit larger devices, remove bay divider(s).

• Unscrew numbered bar and set it aside.

• To remove divider, pull up on the clip to release it from the bar it’s attached to.

• When enough dividers are removed, replace numbered bar and screws.

3 Connect unit power cable to power outlet.

4 Connect devices to USB ports and power outlets with appropriate

cables. Secure cables with wire clips on dividers.

• Connect USB cables to unit ports.

• Connect power cables to power outlets, feeding cables through holes on back panel.

• Load devices in bays (TIP: for better sanitization, insert laptops open-side up and slightly ajar).

• Connect cables to devices.

UVC Charging Cart with 32 USB-A Ports and 32 AC Outlets Instructions

English