eSATA, 2.
Thank you for purchasing the MANHATTAN eSATA, 2.5” External Enclosure, Model 700498. ® This 2.5” enclosure is fully SATA-capable and is equipped with eSATA I-type ports. Install an idle, unused drive to create new and productive storage solutions. The chipset-free design quickly transfers data without conversion between SATA-enabled systems. Most standard 2.5” drives fit inside the durable aluminum case, with a fan that dissipates heat and facilitates cooling.
hardware installation 1. Remove the two retaining screws on the rear panel, then remove the rear panel. 2. Connect the HDD to the rear panel. 3. Secure the hard disk drive in position, then slide it into the external enclosure. 4.
software installatioN Windows 2000/XP 1. Click on the My Computer icon, then click "Manage" to initialize the hard disk drive.
2. Click "Disk Management," then click "Removable Disk," then click "Format.
3. Confirm that "Removable" and "FAT32" are entered/selected in the "Volume label" and "File system" fields, respectively. Click "OK." 4. When the warning prompt appears, click "OK.
5. Click "My Computer" and confirm that the new "Removable" icon appears. The External Enclosure with hard disk drive is now ready for use. Specifications • SATA L-type internal data andpower connections • eSATA I-type external connections • DC single-post power input • 13.5 x 8 x 1.5 cm (5.25 x 3.25 x 0.5 in.) • 82 g (2.9 oz.
www.manhattan-products.com Are you completely satisfied with this product? Please contact your MANHATTAN dealer with comments or questions. ® Copyright © MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners.
