hi-speed usb 2.0 eSATA, 3.
Thank you for purchasing the MANHATTAN eSATA, 3.5” External Enclosure, Model 700511. ® Fully SATA-capable and equipped with SATA L-type internal and eSATA I-type external data ports, it quickly transfers data without conversion between SATA-enabled systems. Hi-Speed USB 2.0 connections offer convenient and versatile data storage, transfer and recovery solutions. Plus: • Supports data transfer rates for Hi-Speed USB 2.
hardware installation Follow these steps to prepare the device for installation, then see Step 6 of Software Installation. 1. Open the enclosure. 2. Connect the power and SATA cables to the HDD. 3. Tighten the sides screws to secure the HDD. On/Off USB port 4. Slide the connected hard disk drive inside the external enclosure. 5. Replace and tighten the two retaining screws to secure the rear panel. 12 V DC in eSATA port 6. Connect the external cables.
software installatioN Windows 98SE Driver Installation (USB port only) 1. Insert the installation CD in the CD-ROM. 2. Double-click the Setup icon.
3. When the Welcome screen appears, click "Next." 4. When the "Ready to install" screen appears, click "Install.
5. When prompted, select "Yes, restart the computer now"; then click "Finish." 6. Connect the External Enclosure with hard disk drive to the USB port of the computer.
. A new Removable Disk icon will appear in the My Computer window for formatting the hard disk drive.
Windows 2000/XP Installation 1. Click on the My Computer icon, then click "Manage" to initialize the hard disk drive.
2. Click "Disk Management," then click "Removable Disk," then click "Format.
3. Confirm that "Removable" and "FAT32" are entered/selected in the "Volume label" and "File system" fields, respectively. Click "OK." 4. When the warning prompt appears, click "OK.
5. Click "My Computer" and confirm that the new "Removable" icon appears. The External Enclosure with hard disk drive is now ready for use. Specifications • SATA L-type internal data and power connections • Hi-Speed USB 2.0 B-Type and eSATA I-type external connections • Initio Inic1610L chipset • DC single-post power input (AC adapter included) • 22 x 14 x 3.5 cm (8.75 x 5.5 x 1.25 in.) • 448 g (15.8 oz.
www.manhattan-products.com Are you completely satisfied with this product? Please contact your MANHATTAN dealer with comments or questions. ® Copyright © MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners.
