eSATA, 3.
Thank you for purchasing the MANHATTAN eSATA, 3.5” External Enclosure, Model 709040. ® Fully SATA-capable and equipped with eSATA I-type ports, the chipset-free design quickly transfers data without conversion between SATA-enabled systems. Just install an idle, unused drive to create new and productive storage solutions.
hardware installation NOTE: Images are for example only. Actual positions of switches or connectors may vary slightly. 1. Open the enclosure. 2. Connect the power and SATA cables to the HDD. 3. Tighten the sides screws to secure the HDD. eSATA port 4. Slide the connected hard disk drive inside the external enclosure. 5. Replace and tighten the two retaining screws to secure the rear panel. 12 V DC in On/Off 6. Connect the external cables.
software installatioN Windows 2000/XP 1. Click on the My Computer icon; click "Manage" to initialize the hard disk drive.
2. Click "Disk Management," then click "Removable Disk," then click "Format.
3. Confirm that "Removable" and "FAT32" are entered/selected in the "Volume label" and "File system" fields, respectively. Click "OK." 4. When the warning prompt appears, click "OK.
5. Click "My Computer" and confirm that the new "Removable" icon appears. The External Enclosure with hard disk drive is now ready for use. Specifications • • • • • • • SATA L-type internal data and power connections eSATA I-type external connections DC single-post power input (AC adapter included) eSATA I-type to I-type flat cable, 1.1 m (3.75 ft.) 12 V / 2 A power adapter, 1 m (3.5 ft.) 22.25 x 12.7 x 3.8 cm (8.75 x 5 x 1.5 in.) 363 g (12.8 oz.
MANHATTAN offers a complete line of PC Components, Peripherals, Cables and Accessories. Ask your local computer dealer for more information or visit us online at ® www.manhattan-products.com Copyright © MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners.
