INDEX GENERAL SAFETY REQUIREMENTS CONNECTORS AND DEFINITION FRONT PANEL CONTROLS REMOTE CONTROL FUNCTIONS INSTALLATION PROGRAMMING THE RECEIVER TUNING SERVICES FIRST TIME WEDGING/ADJUSTING ANTENNA EDITING THE CHANNEL LIST ADJUSTING OUTPUT SIGNAL TO TV 2 3 3 3 4 5 5 5 6 8 ACCESSING THE EPG (Electronic Program Guide) TIMER PROGRAMMING FOR VCR PARENTAL CONTROL SELECTING RADIO CHANNELS RESETTING THE RECEIVER ASSISTANCE AND ADVICE GLOSSARY MULTIPLEXES & CHANNELS GENERAL SPECIFICATIONS 8 9 10 10 10 11 12 13 16
C1: TO TV Connect this output to UHF input of your TV. This will allow you to tune your TV to analogue terrestrial programs as well as to use the built-in modulator for viewing the digital terrestrial programs. C2: ANT LOOP IN TV aerial input to modulator. C3: VIDEO Composite video output to connect to TV or AV monitor etc. C4: AUDIO LEFT/RIGHT Audio outputs for connecting to a HI-FI system or to the TV audio input. C5: RS232 Connector for upgrading software via PC.
13: TV/R To select TV or Radio mode. 14: FAV To access favorite list. Press several times to select the correct FAV list if you have defined more than one. To exit the FAV mode, go to Menu / Favorites and select OFF 15: EPG (Electronic Programs Guide) To view the program event details playing at the time and the following ones. 16: Page Up & Down keys to select next page in the lists. 17: TEXT Displays the digital Tele-text service, if available.
Connecting to VCR Connect your VCR to the VCR SCART on your receiver. PROGRAMMING THE RECEIVER Programming the receiver is achieved through the various menus. In order to simplify this, we will describe accessing a menu as below. Press MENU key to access the main menu. Press Down key to highlight Setup. Press OK to confirm. Press Down key to highlight Service Setup. Press OK to confirm. Enter the 4 digits PIN code (0000 on purchase).
adjust the antenna. See following options. Option 1 If you know at least one network between channel 21 and 69 is used in your area follow below setup. 1. Go to Menu / Setup / Service Setup / enter PIN / Manual Scan. 2. Press Left/Right key to select the channel number of the UHF network that transmits digital channels (see channels list on page 13). 3. On Tx Mode, select 2K with the Left or Right key. 4. On Guard Interval, select 1/32 with the Left or Right key. 5.
The second is to delete, move or rename existing channels. Creating Favoruite channels list 1. Go to Menu / Favourites. The first line indicates OFF, meaning that the favourites mode is inactive. 2. Press the green key to create a list and then the yellow key to edit its content. The screen will change to EDIT FAVOURITES with the main channel list on left and favourites list on right. 3. Use the Up & Down keys to highlight a channel and press OK to add to your Favourite list. 4.
5. Press EXIT to quit. Moving channels 1. Go to Menu / Service Organiser. 2. Use the Up / Down keys to select the channel you wish to move. 3. Press the green key and move the channel to the required position with the Up / Down keys. 4. Press OK to confirm the new position. 5. Press EXIT to quit. NOTE: The channel will keep its logical number. Renaming a channel 1. Go to Menu / Service Organiser. 2. Use the Up / Down keys to select the channel you wish to rename. 3.
Select another channel using Up / Down keys and you can pre-view its program details in the top left window and then by pressing the INFO key you can also view the picture for that channel in the top right window. Press OK if you wish to change to this channel or press EXIT to go back to previous channel. The blue key allows you to view the following days programs (as long as the information is being transmitted). Use the yellow key to go back on day.
NOTE: If you switch on the receiver whilst a program is supposed to be recorded, you will be requested to confirm any changes by pressing EXIT. You cannot record a channel other than the one you are watching. To playback a VCR tape, the receiver should be on standby. Simply insert the tape and start playing. The image will appear on the screen. If this is not the case, press the TV/VCR key on your VCR remote. PARENTAL CONTROL Your receiver is supplied with a Factory default code (PIN) that is 0000.
3. The menu will disappear and after this the receiver will re- initialize and the welcome page will be displayed. 4. The receiver is now back in its original Factory Default configuration. 5. Press OK to start the full scan of the channels again. ASSISTANCE AND ADVICE FREEVIEW™ coverage Check FREEVIEW coverage in your area by texting your postcode followed by your house number or name to 83331* or go to www.freeview.co.uk (*e.g.
Some channels are not received at all. The channels you are receiving do not have adequate signal and quality levels. The picture on analogue channels is not clear. You are located far away from the transmitter. 1.Try an indoor amplifier 2.Try a mast amplifier 3.Try a high gain antenna. You receive all digital channels but the reception is disrupted at times (i.e. when another electrical product is switched on). You are experiencing electrical interference. 1.
appliances such as washing machines, switches etc often cause fleeting reception problems when using indoor aerial. GLOSSARY Receiver: Equipment that allows you to receive digital TV, like Free To View channels. Analogue Channels: Nature of the signals used for terrestrial television since the middle of the 20th Century. Since digital has come along, analogue will disappear (starting 2008). Network: Number given to a frequency band. In UHF, networks are numbered from 21 to 69.
CHANNEL LIST 14
GENERAL SPECIFICATIONS Digital Tuner Input Connector Output Connector Input Frequency Signal Level Co-axial 75 Ohm, IEC 169-2, Female Co-axial 75 Ohm, IEC 169-2, Male 470 MHz ~862 MHz (UHF) -10 ~ –82 dBm System Memory Flash SDRAM 1MB 16MB Decoder Transport Stream Profile Level Input Rate Video Formats MPEG-2 ISO/IEC 13818 MPEG-2 Main Profile @ Main Level Max.
