Specifications

ManualsBrandsManhattan ManualsTV ReceiverPlaza XT-CM

Digital Satellite Receiver

Owner’s Manual

Free To Air / Common Interface / Go To X / USALS

CONTENTS

GENERAL SAFETY REQUIREMENTS 2 ELECTRONIC PROGRAM GUIDE 11

CONNECTORS AND DEFINITION 3 TO DISPLAY SUBTITLES 11

FRONT PANEL CONTROLS 3 TO SELECT AUDIO LANGUAGE 11

REMOTE CONTROL FUNCTIONS 4 TO DISPLAY TELE-TEXT 11

INSTALLATION 4 CREATING FAVORITE CHANNELS 11

SELECTING OUTPUT SIGNAL TO TV 5 EDITING CHANNELS 12

SETTING THE TIME 5 EDITING SATELLITE AND TP 12

ANTENNA CONFIGURATION 6 EDITING CHANNEL PIDS 13

SEARCHING CHANNELS 7 TO SET PARENTAL LOCK 13

CONFIGURING DiSEqC POSITIONER 7 TO RESET YOUR STB 14

AUTOMATIC SEARCH 8 TO UPGRADE SOFTWARE 14

USING BLIND SEARCH FEATURE 8 STB TO STB COPY FUNCTION 14

USING EVENT TIMER 9 TO UPGRADE SOFTWARE VIA PC 14

TO CHANGE CHANNEL OR SATELLITE 9 EDITING TP IN CHANNEL SEARCH 15

SELECTING RADIO CHANNELS 10 TROUBLE SHOOTING GUIDE 15

VIEWING SCRAMBLED CHANNELS 10 GENERAL SPECIFICATIONS 15

INTRODUCTION

Welcome to the world of Manhattan digital satellite receivers. Please read this manual

and the following general safety requirements carefully before installing your STB.

The Plaza XT is a high performance digital satellite receiver, supporting many different

requirements of broadcast standards worldwide. This STB includes the best possible

features as well as Blind Search together with the most up-to-date electronics hardware

and easy to use on-screen menu.

GENERAL SAFETY REQUIREMENTS

1. WARNING: Do not install this equipment in a confined space such as a bookcase

or similar unit. Covering the ventilation openings with items such as newspapers,

tablecloths, curtains etc should not impede the ventilation.

2. WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture. The apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids, such as vases, are placed on

apparatus.

3. WARNING: The mains plug is used as disconnect device, the disconnect device

shall remain readily operable.

4. Correct disposal of this product: This marking indicates that this product

should not be disposed with other household wastes throughout the EU. To

prevent possible harm to the environment or human health from uncontrolled

waste disposal, recycle it responsibly to promote the sustainable reuse of

material resources. To return your used device, please use the return and

collection systems or contact the retailer where the product was purchased. They

can take this product for environmental safe recycling.

Summary of content (9 pages)

PAGE 1
CONTENTS GENERAL SAFETY REQUIREMENTS CONNECTORS AND DEFINITION FRONT PANEL CONTROLS REMOTE CONTROL FUNCTIONS INSTALLATION SELECTING OUTPUT SIGNAL TO TV SETTING THE TIME ANTENNA CONFIGURATION SEARCHING CHANNELS CONFIGURING DiSEqC POSITIONER AUTOMATIC SEARCH USING BLIND SEARCH FEATURE USING EVENT TIMER TO CHANGE CHANNEL OR SATELLITE SELECTING RADIO CHANNELS VIEWING SCRAMBLED CHANNELS 2 3 3 4 4 5 5 6 7 7 8 8 9 9 10 10 ELECTRONIC PROGRAM GUIDE TO DISPLAY SUBTITLES TO SELECT AUDIO LANGUAGE TO DISPLAY TELE-TEXT
PAGE 2
CONNECTORS AND DEFINITIONS Please do not connect power to the STB until all other connections have been made. REMOTE CONTROL FUNCTIONS NOTE: POS Positioner key is active only in DiSEqC 1.2 mode. It is not active in USALS mode.
PAGE 3
OSD Setting – Menu Color Configuration Time Setting Configuration Menu Items: Select an item to change its color. Red, Green, Blue: Enter with 0-9 keys or press left / right to change color value Default: If you wish to return to default settings, press OK Summer, Spring, Autumn, Winter: You can select other default themes with colored keys. Time Mode: Select Manual to set the time manually. Auto mode is only possible after channels are tuned. Region/City: For Auto mode, select your location.
PAGE 4
Positioner --- USALS SEARCHING CHANNELS Press MENU key and go to INSTALL. Select Channel Search. Channel Search Configuration Longitude, Latitude: Enter your location with 0-9 and PAGE up / down keys. Example; London – Longitude = 0 and Latitude = 51.5N USALS: Press OK to go to position automatically. Go To 0: Press OK to go to 0 position on the motor Sat Search: Select Single if searching manually. Select Multiple if searching all automatically.
PAGE 5
Blind Search – Transponders Channel Search Channel Browser Operation To change channel: Use PAGE and CH up / down keys. Press OK on the required channel. Press OK again or press EXIT. To change satellite: Use SAT key and select satellite. Alternatively use left / right keys to select satellite. Press OK on the required channel. All Satellites list: To display collective list of channels for all satellites. Use left / right and select All Satellites.
PAGE 6
ELECTRONIC PROGRAM GUIDE (EPG) To display correct EPG it is important to set the time first. Press red key, the following menu will open. TV EPG Guide Favorite Ch Add: Press green key on the required channel. Favorite icon will appear against the name. Delete: Press red key on the channel to be deleted. Favorite icon will be removed. Rename: Press yellow key to display keyboard. Select and press OK on the letters to rename. Press EXIT after naming. Change Group: Press blue key.
PAGE 7
Sat/TP Edit --- Satellite Configuration Note: After ‘Lock’ is turned ‘On’, channels locked in edit menu will require a password to open. If STB lock is on, a password is required to operate any function. After applying new password, the default password is no longer operative. If you loose or forget your password, apply the master password given on page 16. Add: Press green key to display keyboard. Select and press OK on letters to name the satellite and press EXIT.
PAGE 8
LNB Power & Polarization 22KHz Tone DiSEqC Control Demodulation Input Symbol Rate FEC Decoder EDITING TP IN CHANNEL SEARCH MENU Press MENU, go to INSTALL and select Channel Search. Configure following items. Adding TP Satellite: Press OK and select satellite. Press right key and go to Scan Mode and select Manual TP / All Ch. TP Data will open. Press left / right and select User TP 1. Enter, Frequency, Polarity and S/R. Press EXIT and TP Data will close. Added TP is already selected for channel search.
PAGE 9
Physical Specifications Size (W X H X D) Weight (Net) W 280 mm, H 48 mm, D 218 mm Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice -------------------------------------------------------------------------------------------------MASTER PASSWORD 6699 This is the master password for your STB. Cut this section out and keep it in a safe place.