User manual

Multi Functions
Multis can be used to access complete setups that are made up of up to six tracks and their
corresponding parameter settings. The functions of the multi menu are "load", "save", "delete", and
"initialise".
In a multi only the track names and their position on the memory card are stored, not the sound data.
This helps to store faster and saves the card’s space. Nevertheless the used tracks must be stored on
the inserted memory card while you load a multi.
! Please note that tracks in the Memotron Rack’s internal memory will be lost, as soon as the
Memotron Rack is powered down and therefore have to be saved on Compact-Flash-Card
previously!
Loading Multis
To load a multi, the desired memory card has to be inserted into the Memotron Rack first. If that has
not been performed yet, please change the corresponding storage medium. Refer to section "Change
Memory Card" on page 14.
Use the DATA-knob to browse through the menu levels until you reach the "Sound Settings" page.
Select "M:" and enter the multi menu. Click on "Load Multi" and open the file directory.
Choose “Card:” and select the desired multi. To cancel the loading process and leave the directory,
simply hit the ESC-button.
When pushing the DATA-knob, the selected multi will be loaded with all its settings. In case the
selected multi requires a track that is not to be found on the currently inserted memory card, an error
message will pop up and the loading process will be aborted.
When the loading process has been completed successfully, the display will return to the sound
settings page.
Memotron Rack OS v1.2 User Manual 11