User manual

MIDI Setup
The MIDI-Setup controls all functions that are used to play the Memotron from a suitable external
MIDI-device (e.g. master-keyboard or a MIDI-sequencer such as the Manikin Schrittmacher).
The MIDI-Setup also controls all functions to enable the Memotron to play suitable external
MIDI-equipped soundgenerators via its internal keyboard.
The following parameters can be edited:
Rx Channel 1 ... 16, omni MIDI-Channel that receives MIDI-data
Tx Channel 1 ... 16 MIDI-Channel that sends MIDI-data
Local Control on / off disconnects the Memotron’s keyboard from its
internal soundgeneration.
Rx Transpose –24 ... +24 transposes received MIDI-notes –/+ 24 halftones
Tx Transpose –24 ... +24 transposes transmitted MIDI-notes –/+ 24 halftones
Device ID 0 ... 126 assigns an individual ID-number when more
Memotrons are used in a MIDI-instrument setup.
The Midi-Setup can be found in the main menu:
As soon as a parameter has been selected, it can be accessed for editing by pressing the
DATA-knob (4). The cursor becomes an arrow (5). Moving the DATA-knob alters the
parameter value (6).
Pressing the ESC-button exits the MIDI-Setup and the display jumps back to the main menu (1).
Memotron User Manual
19